The Takedown Tools ReviewsSee store reviews

Had to wait a little on shipping. I’m glad they didn’t take it personal that I was emailing everyday. When it arrived it was a straight drop in, in a Sons Of Liberty lower. I had already added a Giselle Super 42 and H3 buffer. I was kinda nervous to pull the trigger the first time on enhanced semi-auto, but then I couldn’t wipe the smile of my face when it ran flawlessly and fast. I shared the video, and have a bunch of buddies lining up to get one! Thanks AR Takedown Tools, and Partisan Trigger...

Great FRT trigger, and very easy to install (most cassettes are). Installed it on my DDM4V7 and it functions perfectly, and it worked right out of the box and operated with no issue unlike some other brands I've tested out. - A quick install tip if you are having a hard time closing the upper and lower receiver (experienced this on my DDM4V7), leave the anti-walk pins so the cassette can slightly move in the pocket. The BCG can get stuck on the nub and the anti-walk pins might restrict the slig...

Exceeded two expectations - first, the takedown tool (free with Partisan Disruptor order) worked great and fit exactly like it should. Second - the trigger and safety were perfect. I have a very early model Springfield Saint AR lower on this rifle and, after needing to grind the shelf down on another for a standard super safety, expected to do the same here. But no, it popped right in and worked beautifully both suppressed and unsuppressed. Well done. As for the included tool, it was so han...

Great FRT trigger, and very easy to install (most cassettes are). Installed it on my DDM4V7 and it functions perfectly, and it worked right out of the box and operated with no issue unlike some other brands I've tested out. - A quick install tip if you are having a hard time closing the upper and lower receiver (experienced this on my DDM4V7), leave the anti-walk pins so the cassette can slightly move in the pocket. The BCG can get stuck on the nub and the anti-walk pins might restrict the slig...

Great and easy to install. Items of note that do not affect a 5 star review. - the hammer is a little light so hard 9mm primers do not always fire when in the third position. - my anti walk pins were a couple mills too long, a little sanding fixed that no problem. - the selector clicks are a bit light and faint vs what you’re likely used to but you CAN tell you’re in position. - the install instructions don’t tell you but this assembled way easier when the hammer isn’t cocked. That being s...

Thus far it’s been a bust. Conventional semiauto works, kinda creepy trigger but not too far from milspec. Enhanced semiauto fires one round then leaves a dead trigger. I’ve been through the troubleshooting list with no improvement. Currently awaiting a lighter buffer, hopefully that will help. ETA: just received and installed the H2 buffer weight. Also scrupulously cleaned and lubed the whole works. Rifle now runs like the proverbial scalded ape both with steel cased Wolf and green tip. I’m f...

AS Designs ARC-Fire V2 — Ambi Kit | 0°/90°/180° Selector Throw working very well. Trying various BCG and buffers for optimum performance/tuning.. Currently with KAK DBC BCG and carbine buffer working flawlessly. ( Previously with auto BCG and H3.and flawless too.) Will try H1 next range visit to see if any improvement ( slower fire ) or over buffered. This is on a 16 inch carbine length build. Awaiting Partisan Disrupter for a 10.3 build for a Colt Commando retro look. . Will interchange BCG an...

I recently installed an FRT in a lower I use for multiple uppers of different caliber. I couldn't get it to operate properly, and after a little research I discovered I needed an H3 buffer. Since I already had a captured system in the lower I wanted to stick to that design. I found an H3 captured buffer system for a great price on your website and ordered it. Simply replaced the old buffer, drove to the range, and opened fire. The video shows firing the 3rd mag. The barrel heat was the only reas...

Just took it to the range for the first time and it worked perfectly! It is sensitive enough to put good 3-4 round bursts on target without losing sight picture. Of course, the rifle climbs if the proper stance and foot work is not used but that is going to happen anyway, simply from recoil. It fires very quickly and with no loading or jamming of any kind. I have only taken it to the range once but have already put close to 700 rounds down range in that visit. I love this and will buy more! Tota...

Really works good but even better with fine tuning. I am using this currently with a Schmid Nickel/ Teflon coated 3.5lb trigger and it runs flawless with a SS cut. I have also got this Arc Fire V2 to work with the RAVE 140 trigger as well with a SS cut in another rifle. I recommend using the VLTOR A5 Buffer system with A5 H3 or H4 buffer to run optimal. Cycles a little hard and fast with carbine buffer and H2 or H3. The A5 H3 or 4 is the way to go with this SS as it is very controllable and smoo...

Very impressed partisan disruptor drop in group. So far i can't be certain because I don't have any instruments to test the fire rate but just by sound and feel it feels faster than my buddies rB. I also do need to include the fact that he's running an H2 and I'm running an H3 buffer could have something to do with it. As far as the feel of the trigger itself either one of us can tell the difference between his and mine except the selector. Mine feels a little loose not in the way of the movemen...