CIC Workshop Reviews

CIC Workshop ReviewsSee store reviews

Robert S.Verified

I got the bits and put them right to work. I was making a 3D carving of an old town photo, that I converted using VistaSculpt and vectric. These bits are sharp and do the job asked of it they one of the sharpest and long lasting bits out there, I highly recommend these bits.

1/4’’ x 1’’ Downcut - 1/4’’ Shank - DC221

Bryce J.Verified

My opinion, best 1/4" down cut bit on the market. Its advertised as a rougher, but I use it on everything, signs, cut outs, pocketing, ext. You can run this bit hard and it stays sharp! Nice tool!

Golden Girl - 1/4" x 1" Downcut Rougher

Bernard R.Verified

I am impressed by the smoothness of the cuts. I tried two different projects; an elliptical tray about 9" long and the star Ryan did on the video. They both came out very nice. The machine used is a Lunyee 4040 and is limited by the wattage of the spindle. This is my first venture into the CNC world, so I am defintely a novice.

CNC Router Starter Set – 5 Must-Have Bits for Beginners

Ben K.Verified

Communication on my shipment was excellant! The product is exactly the materials you need and packaged very well! I was super impressed by the hand written note, and amazing customer service. This is one heck of a business and I will definately buy more. Keep up the awsome work!

October Kit- Epoxy Christmas Ornaments

Theo M.Verified

The kit was well packaged and very professional. Epoxy was great; however there was a knot in the walnut that couldn't be avoided in the carve. This caused a through hole that had to be sealed with some tape. A minor leak but not am ideal solution.

October Kit- Epoxy Christmas Ornaments

Gregory R.Verified

The board looks great, but I haven't used it yet. I'm working on a couple of inlay projects now, but i haven't gotten to the project where I will use this board. I would love to send you a picture when I do. Thanks again, Greg

Premium Guatambu Inlay (Top Board)

Keith W.Verified

I have bought several of these kits in various materials and have always been pleased. This was no exception. This makes end grain cutting boards a "Can Do" for anyone, even if they don't want to create Inlay Boards.

Custom Inlay Builder Kit

Lucky W.Verified

Not sure that I’ve seen larger chips thrown ! Wish I had taken a pic or video but was too focused on the project and was a bit mesmerized by the size of chips generated. The material was cherry but my next project is oak. Looking forward to seeing chips fly!!!

1/4’’ x 1-1/2’’ Upcut Extended - 1/4’’ Shank - UC2215

Customer photo review of Bottle Cap Openers Digital File

Ronald G.Verified

The file was easy to use. The only problem i had was the screw holes. I used the 1/16 bit I purchased and drilled to .25 as instructed. When trying to install the screws, the holes were undersized. The first screw head broke off. Of the 19 shapes, 13 broke screws because the holes were too small. I ended up hand drilling the holes using a slightly larger diameter bit. When I did the second batch, I hand drilled the entire lot. Didn't break anymore screws. Also I didn't program my cnc t...

Bottle Cap Openers Digital File

Eric A.Verified

I have a project I need to do and it required a piece of maple that was wider than 10 inches. I realized there was nothing like that locally unless I made a board myself by gluing boards together. I already have a lot invested in my CNC machine and software. I like the idea of being able to buy large pieces of wood instead of spending thousands to make my own boards. I want to work on my CNC skills instead of building boards big enough to machine. This goes against my DIY instincts where I d...

Hard Maple Panel

Marco P.Verified

Great bit. It’s a work horse. 150 in /min at 1/4 deep , and 75% step over with no issues. If you ain’t cutting it close, you ain’t cutting it right.

Golden Girl - 1/4" x 1" Downcut Rougher

Customer photo review of September - Complete 🔥Inlay Starter Kit🔥

Carly M.Verified

Love these kits! Only issue is the oil leaked onto a couple plug pieces during shipping. Am going to design my cuts around the oil so shouldn’t be too much of an issue but sadly since I can’t use the full pieces it loses one star.

September - Complete 🔥Inlay Starter Kit🔥

Customer video review of Golden Boy XL - 1/4" x 1.5" Upcut Rougher

Jason G.Verified

Just as good as the Golden boy with a little extra reach. I use these bits every time I turn the CNC on. Great bits for boxes, trays, relief, templates. Whatever you make, these will save your other bits.

Golden Boy XL - 1/4" x 1.5" Upcut Rougher

Andy G.Verified

I am new to the CNC, but I am working forward by taking a class for VCarve Pro. I have done a VCarve inlay on scrap oak and walnut using the face grain. Worked out great using the bit. I have a cutting board that I am working on and the walnut board V-groove has come out incredible. Will start on the male plug soon. I have had mishaps with dropping a bit and breaking the tip off. Lesson learned. I do enjoy working with the CNC and VCarve Pro has been a true leaning experience. I watch your video...

60 Deg V-Groove - 3-Flute - 1/4 Shank - VSC60

Robert F.Verified

The bit does an excellent job cutting the HDPE. I just need to experiment with it a little to see what types of illustrations and text can be cut with it, and look good.

1/8" x 1/2" O’Flute - 1/4" Shank - OF215

Mike P.Verified

Kits great. Looks and packages good. The free file they give you can need some work. A little thrown together. Instead of the different item being on different sheets they are scattered around on one sheet. Even when you refresh the tools paths they move all over the sheet meaning they just moved them to their random locations right before they hit save. Not a big deal but looks sloppy. If it was anyone else it’s fine but I expect quality that CIC offers. This doesn’t live up to the e...

🔥Interactive Maze Game Builder Kit - BamX™🔥

Eddie P.Verified

The kit arrived to Ca. intact with no damage to box or contents. Operator (me) turned this inlay project to a future epoxy/resin fill project. Ordered two more kits…..

September - Complete 🔥Inlay Starter Kit🔥

Bob N.Verified

Your inlay kits are awesome! They are cost effective and save so much time and materials. I like the thickness of the inlay material because if something goes wrong I can use the other side. I will send photos when I get this latest project completed.

Custom Inlay Builder Kit

Kenneth S.Verified

I have been using bits from amazon and satisfied with the results. HOWEVER, when I tried out your bits I was blown away. Will never use amazon bits again. I accidentally landed this 3/16 bit right on top of a Kregg pocket screw, the screw head was neatly removed and the bit never complained. Absolutely no damage to the bit.

V-Carve Inlay Bit Set

Billy M.Verified

I haven't had the chance to use them yet, I'm moving from the West Coast to the East Coast and preparing for that is taking up my time. After the move and I get set up then I'll try them out.

V-Carve Inlay Bit Set

James M.Verified

I really appreciate the effort that CIC woodworkers put into providing quality supplies and support. I am new to CNC and the learning curve has been rather steep for me. The kits that CIC have been producing make it so that I can have success while I’m learning how to use the software. I still make mistakes but they are fewer and further apart. Thank you CIC Woodworkers James Moody

Deer Inlay Digital File

Andrew S.Verified

Hi there, I received it in just a few days. I was in the states on vacation and had it delivered to my hotel. At the reception they looked at the handwritten note and were super impressed. That was really nice. The quality seems great visually but I've not had a chance to use it yet, but will very soon. Thank you

30 Deg V-Groove - 3-Flute - 1/4 Shank - VSC30

Joshua W.Verified

Once I figured out the proper speeds and feeds for my machine, this but cut like a hot knife through butter. It handled hickory and cherry like it was cutting softwoods and left a clean cut.

1/4’’ x 1-1/2’’ Upcut Extended - 1/4’’ Shank - UC2215

Raymond H.Verified

Love the bit, its used every single day and right now (life wise) I'm getting double the usage with this bit versus the same bit purchased off the Amazon website, so yes I strongly recommend this bit if you are saving money and want a longer lasting cleaner cutting bit.

1/32 Radius - 5.4 Deg 3D Tapered Ballnose - 1/4" Shank - TBN1-32

Keith W.Verified

Kits looks great, just getting ready to run it this week. I have been getting a new Next wave HD610PRO set up and that is finally done with an Airweights vacuum table. Had some issues with the drawing being all on one sheet and trying to add the roof and side details but Mitchell's U Tube helped a lot. He will be a big help on the projects going forward. I am putting the various parts on, "Sheets" to allow for easier changes on subsequent runs. I did see a lot more variation in the thickn...

🐦 ColorCore Bird Feeder CNC Kit

John A.Verified

When doing any 3D bas relief carving, this is my go to bit. Sure, it takes longer then a 1/16 bit but when one needs the best details, this is a good bit.

1/32 Radius - 5.4 Deg 3D Tapered Ballnose - 1/4" Shank - TBN1-32

David C.Verified

I have been demonstrating this tool's performance at my hobby CNC group meetings. We can hardly keep up with the awful mess it makes as It effortlessly plunges and runs around at 120 IPM. We all love it!

Baby Boy - 1/8" x .625" Upcut Rougher - 1/8 Shank

Stewart S.Verified

I used the Color Core for the sign in front of my store. The two sided option gave me flexibility for the messaging to our customers as they entered the store, and as they went out of the store. Brilliant!!

ColorCore HDPE Plastic - Premium Multi-Layer Engravable Sheets

Gerald H.Verified

You guys are great! I love your products, your prices are reasonable and you always go the extra mile with a note or stickers! I hope you always keep that level of customer service. If you do, I’m your customer for life!

1/32 Radius - 5.4 Deg 3D Tapered Ballnose - 1/4" Shank - TBN1-32

Roger S.Verified

I am using this bit to cut finger joints on a 2 x 4 foot hope chest made with glue ups of 3/4 inch quarter sawn oak, doing 3 passes followed by a finishing cut with flat spiral bit leaving -.0025 inches to create proper fit of the finger joints.

Golden Boy - 1/4" x 1" Upcut Rougher

Westley S.Verified

This bit is a monster! Don't get too confident though. You have to slow it way down for super dense wood. I will be buying the 1/8 bit in this variety.

Golden Girl - 1/4" x 1" Downcut Rougher

Scott P.Verified

Haven't started the router table yet, but the phenolic plywood looks really nice, and the delivery and customer service were outstanding! Love the extras and the personal note included in the package... really above and beyond, and I'll be back to shop again soon!

Phenolic Birch Plywood - Hex Ply

Harold G.Verified

Thank you thank you. I watched your inlay videos and learned a lot. I failed twice making an inlayed sign but after your help and new bits all is great. Really appreciate it.

V-Carve Inlay Bit Set

John S.

Came out great again! ShopSabre 23. 5 different colors of epoxy in logo so took longer due to drying times. John S.

Game Day Board CNC Kit

Keith W.Verified

I have used BAMX on several gift projects and I love it. I take advantage of the two colors to make unique gifts. I will send pictures when I have my XMAS gifts done

BamX - Bourbon

Richard D H.Verified

I ordered two inlay kits and haven't cut them yet. Been busy building an enclosure for my Shapeoko, as I am adding a laser to it for engraving and logo additions to my builds. Will likely build the inlay kits in a week or two and will add another review then. Looking forward to learning a lot, as I'm brand new to the world of CNC and lasers too.

Complete CNC Inlay Starter Kit (12"x9")

Drew O.Verified

This is something I’ve wanted to do for a while! The only thing I would change is the clearances between the joints, which I was able to figure out. Thanks for all you do and for sharing your knowledge and information. I really appreciate it!

Puzzle Piece Tray Digital File

J.r. M.Verified

Already built the inlay press. Starting to glue up the rocking chair for my grandson. Once I get the process organized for the rocking chair, I have a list of contemporaries looking to me to build one for their grand and great grandchildren. Should keep me busy.

Commercial Licenses for Physical Product Sales

Randall N.Verified

It was fun making the maze, watching it carve it out. My wife loves it so much, she had me order 3 more to make and send out for Christmas gifts.

Interactive Maze Game CNC Kit

Thomas H W.Verified

I frequently use CIC's 1/2'' x 1/4'' Point Cutter Roundover 1/4'' Radius - 1/4 Shank - PC25 bit to produce a nice rounded edge on signs and plaques that I'm making with my Shapeoko 5.1 Pro router. The 1/8"x 3/4" Upcut - 1/4" Shank - UC2175 bit has proven to be a great match for a final couture cut.

1/8"x 3/4" Upcut - 1/4" Shank - UC2175

CIC Workshop ReviewsVisit store