CIC Workshop Reviews

CIC Workshop ReviewsSee store reviews

Michael S.Verified

What I ordered and received were dead on and it looks great! I haven’t gotten up the nerve to cut it yet but I’m gaining knowledge with other projects. Also I have EASEL so I will need to figure that out also. The note from his mother thanking me for the purchase was a nice touch 🥰

Custom Inlay Builder (18"x12")

David J.Verified

I've bought so many bits from CIC, I almost have their entire inventory memorized, and I have yet to get a bit that wasn't one of the best bits I've bought, almost half the price of other brands, My most recent were the 1/8"x1" and 1/4"x1" Compression Chip breakers. Great Bits. Both cut through hardwoods, like Maple. Cherry and Walnut with no problem and leave a relly clean edge. Can't ask for more. The only problem I have with CIC bits is they sell out fast, so get them while you can...lol

1/8" x 1" Chipbreaker Compression - 1/8" Shank - CM111CB

Jerry J.Verified

The bit was exceptional when used as designed. Unfortunately It broke when I was pocketing some holes in my spoilboard and got too close to the aluminum T slots. My fault.

Baby Boy - 1/8" x .625" Upcut Rougher - 1/8 Shank

Ted K.Verified

I have some young men from my church coming to my shop to make their mother's christmas gifts. We have done One 3d carve so far and The carve itself neede no sanding. Cot very smooth and clean!

1/32 Radius - 5.4 Deg 3D Tapered Ballnose - 1/4" Shank - TBN1-32

Paul L.Verified

I love this bit, I can get so much detail if I use it per the speeds and feeds recommended and decrease the overlap. Be careful with it, I dropped the first one I purchased on the floor and broke the tip, but I was happy to purchase another because I liked the finish it provides.

1/64 Radius - 6.2 Deg 3D Tapered Ballnose - 1/4" Shank - TBN1-64

Gregory P.Verified

My CNC isn't large enough to cut the outside pieces so I cut them on a scroll saw using 2 pieces of 3/8" baltic birch laminated together. I did all the rest on the CNC. I it came out great!

Mini Skeeball Table Digital File

Tom M.Verified

As with everything with CIC Workshop, these guys are great. The files are always spot on and the products are as described every time. Thanks to Ryan and the team for putting in the work and making it easier for those of us who are just learning the CNC's. Big B's Woodshop appreciates you!

Inlay Press Digital File

Mark H.Verified

Cuts like warm butter. All was fine. Depth of cut should be .060. Some say .050. I had uneven colors at that depth. Great ‘Mom’ worded note. Damn cool touch.

ColorCore HDPE Plastic - Premium Multi-Layer Engravable Sheets

Chad H.

Great products, had to square them up a bit to get the joints lined up but love how they it turned out.

Walnut Panel

ShawnVerified

I used this bit to make a 3d engraving of one of my wife's favorite pictures of our grandchildren when they were young. The result was excellent and she loved it!

1/32 Radius - 5.4 Deg 3D Tapered Ballnose - 1/4" Shank - TBN1-32

Westley S.Verified

This is my second time ordering the golden boy rougher. I am able to run it much faster than a regular downcut bit of the same size. They last a very long time and I will always have one in my arsenal.

Golden Girl - 1/4" x 1" Downcut Rougher

Gary E.Verified

It took me awhile to figure out what you had done with the tool paths. Since I use version 12, I created three layers, one for notes, one for the plastic, and one for the maze. The bamboo cuts beautifully and everything fits together perfectly. I would definitely recommend this kit.

Interactive Maze Game CNC Kit

Richard G.Verified

I received the file very quickly and it was easy to work with. Between your video and the file it answered a lot of my questions about inlays. Thank you so much.

Deer Inlay Digital File

Jeffery Mccoy T.Verified

Great service and packaging. Haven't used yet, but have three projects coming up that will need this bit. Watched Ryan's video for step-by-step instructions and already created the needed toolpaths.

3/8" x 3/8" Keyhole - 1/4 Shank - SE3050

Tim H.Verified

I placed my order with CIC and thought it was going to arrive sooner than it actually did. However, the staff at CIC let me know that there would be a delay, and then a second delay. No big deal to me, since I am only a hobbyist and not under a time crunch. What I really appreciated was the communication from the company, and in that regard alone they are top notch. When my order arrived, every piece was practically perfect, so a big pat on the back to the folks who milled the lumber and fil...

Hardwood Project Pack - 30pc, 7/8" x 1-3/4" Strips

Robb B.Verified

Made a few family name signs with text on different levels like the ones Ryan made in a video. I was a little concerned about the depth of cut and feed rate he was running. I followed his recommendations waiting for the bit to snap, but it held up and did a great job.

1/8’’ x 3/4’’ Downcut - 1/4’’ Shank - DC2175

Dave S.Verified

My mom loved it. I live at home with my mom and I am trying to learn woodworking. I gave her this because she help me in my little shop.

Cherry End Grain Base Board (18"x12")

Peter M.Verified

Great material ...Easy to work with and extremely little sanding and finishing needed. will definitely be buying more in the future. I have enjoyed all of my purchases from you .. especially the kits ... Keep them coming

BamX - Bourbon

Brian M.Verified

This bit is amazing. It can clear out pockets really quickly and is great for initial profile cuts. It really speeds up my work flow over a 1/4" bit.

Big Girl - 3/8" x 1.25" Downcut Rougher - 3/8 Shank

Dave Sanek S.Verified

This bit is a great compression bit and if you do any carving that requires a clean entry with no surface chipping and then clean chip carry away, this is the bit for you. I work with some 3/4" cherry ply and maple ply and there was not one chip out on the top surface. The bit is aggressive but not to the point of destructive. definitely worth adding to your bit arsenal.

1/4" x 1" Chipbreaker Compression - 1/4" Shank - CM221CB

Jeff J.Verified

Perfect CNC file. I already cut the design and it came out excellent. The details carved cleanly, the file was easy to use, and I didn’t have any issues with it. Very happy with the finished result and would definitely recommend this design.

USA 250 Seal Digital File

Philip B.Verified

Great product, delivered on time! I also appreciated the handwritten note and extras in the box! Will order again. (BTW- Thanks again for all the youtube content and helpful how-to's)

CNC Router Starter Set – 5 Must-Have Bits for Beginners

Robert F.Verified

This is the first time I have worked with this material, and I found it easy to use. I love that (unlike with wood) I don't have to spend a seemingly endless amount of time sanding.

ColorCore HDPE Plastic - Premium Multi-Layer Engravable Sheets

Robert F.Verified

I am working on my second full batch of bottle openers, in preparation for a craft show at the end of September. If you make the entire sheet the way Ryan set it up, it is not difficult to make these. However, I am having trouble figuring out how to delete some of the openers I don't want, and how to replace them with ones where I want more than one.

Commercial Licenses for Physical Product Sales

Charles B.Verified

Doing my inlay carve and loved the way this bit handled the cherry and maple. I had no problems getting everything lined up and there were no gaps between the female and inlay plug. thoroughly enjoy using this bit.

30 Deg V-Groove - 3-Flute - 1/4 Shank - VSC30

Michael N.Verified

Your unexpected gifts were a blessing. I'm still working to get everything in order around the house. I missed not being able to drop in. When I am back in Texas I promise to drop in. Thank you for everything. You've touched lots of hearts. Mike

Misc

Glenn D.Verified

This was the first time I tried to carve anything without using Carbide Create. I had set my Z with my 30 degree V bit installed, then I put my .25 upcut bit in and started the first cut expecting it to tell me to change bits and it didn't, so it cut a deep grove before I could stop it. I was able to fix the mistake with a Dremel tool and a lot of sanding, Doesn't look too bad but did learn a valuable lesson. The rest of the cut went well. Overall, it turned out good.

Wavy USA Flag CNC Kit

Mark L.Verified

Great file. Very helpful in identifying design elements for inlay. Getting into inlay design and files like these are very helpful for understanding clearances and required spacing for elements in a design.

Deer Inlay Digital File

Keith W.Verified

Quality is excellent. This makes making end grain cutting boards for XMAS presents possible. I can concentrate on the inlay process and not have to make the board blanks. Great Idea.

Custom Inlay Builder Kit

David J.Verified

Love the Gold Digger series of bits. I've used them all almost daily since I got them to cut deep pockets in Hard Maple, Cherry, Mahogany, Walnut and Cedar. They really speed up the time, and surprisingly, leave a pretty smooth bottom and wall. Not like the ridges most other roughing bits I've used in the past. Just do a 0.020 finishing path with either CIC'S UC221 or DC 221, and there's virtually no sanding. Great bits.

Gold Digger Family Set of 3

Paul K.Verified

Made my second one yesterday after a relative decided she needed the first one for her grandson. This one turned out better than the first after I took the advice from Slim on the Support Team. He was spot on with what I needed to do to resolve my issue.

Interactive Maze Game CNC Kit

Shawn M.Verified

I ran a upcut roughing bit first since it was hardwood. The keyhole bit ran with ease and left a smooth cut. I followed Ryan's video and had zero issues.

3/8" x 3/8" Keyhole - 1/4 Shank - SE3050

Paul K.Verified

Used it for the first time today. It did a great job. That in combination with the wonderful tech support I got a few weeks ago will keep me coming back to CIC!

1/4’’ x 1’’ Downcut - 1/4’’ Shank - DC221

Dale D.Verified

My 2nd order with CIC Workshop and it was nothing short of amazing. The value is amazing. The fact that they shipped free up here to Alaska is great. Most companies treat us as if we’re a foreign country. I not only got a great value, I got treated as if I was an important customer, not just an order. Thank you and I’ll see you again soon.

Custom Inlay Builder

Hannah W.Verified

I absolutely love the boards! After watching your VCarve inlay videos I thought I had it but not yet. The male plug isn’t working right but I love all the videos

Complete CNC Inlay Starter Kit

Customer photo review of 🔥 LIMITED 🔥 Canarywood Inlay (Base Board)

Michael R.

This Paduak, Maple and yellow heart inlay board was made from CIC end grain boards for my daughter Caitlin. Both are pictured!

🔥 LIMITED 🔥 Canarywood Inlay (Base Board)

Justin W.Verified

The order process was quick and painless. Everything shipped out very quickly faster than expected. Came with a handwritten note was a great buying experience and the bits that I bought have been way better than anything else I’ve had in the past. I will be replacing all my bits

Engraving V-Bit Set – 30°, 60°, 90°

Dave S.Verified

Haven’t had a chance to cut yet, but the material is as expected. The only thing I’ll say is that I would like to see a wider range of colors. Also, unrelated, but any chance of some Cedar panels? I love using your hardwood panels for most of my projects, however, I have a few that I need an outdoor, upstate NY application. Sun, humidity, and wet. If you offered Cedar panels, instant buy! Thanks, you guys rule!

ColorCore HDPE Plastic - Premium Multi-Layer Engravable Sheets

Troy G.Verified

As a new person in the CNC router world kits like this builds confidence in creating and running other jobs. With a new project each month the learning and experience just keeps going.

🔥Interactive Maze Game Builder Kit - BamX™🔥

Stan Rissler R.Verified

I got my bit a lot quicker than I expected and received with it a handwritten note. I really really appreciated that. It helped me feel excepted into your world of woodworking. As far as the bit ,I really like it, and it works wonderfully. I am on a journey with my woodworking hobby and looking forward to ordering from y’all in the future. God bless your day!

1’’ X 1/4’’ Surfacing & Flycut - 1/4’’ Shank - SURF1

CIC Workshop ReviewsVisit store