CIC Workshop Reviews

CIC Workshop ReviewsSee store reviews

Ray D.Verified

These flag kits are awesome. I was able to double the feed rate on the stripes on my onefinity. Secured the flag to a larger board with screws on the back and just clamped the larger board. Best looking wood flag I’ve seen and everything just worked. Used the same finish as cic. Applies easily and looks great.

Wavy USA Flag CNC Kit

Gerard W.Verified

Had and issue with one tool path, called support and they got back to me with a solution the same day. Great. The problem is really mine learning Carve. The project and materials are well worth the price.

Interactive Maze Game CNC Kit

John B.Verified

The file is good I am in the process of cutting it. Have to recut female because board was not flat so male is not fitting right. My fault no file. Lol Thanks

Deer Inlay Digital File

Michael P.Verified

Excellent product! The stainless steel feet are a perfect size and have some weight to them. Definitely high quality material used. Overall CIC is a great place to do business. Shipping was super fast, customer service is top notch, and the products you buy are well made!!

Premium Cutting Board Feet - Brass/Stainless Steel/Copper

David B.Verified

I’m a beginner with the Cnc and managed to break this bit while setting my Z. CIC sent me a new bit right away and I was able to complete my project on time. Great company to work with and The bit worked flawlessly.

1/8" x 1/2" O’Flute - 1/4" Shank - OF215

David J.Verified

I have many surfacing bits. All seemingly made for one purpose. 1 for spoil boards, 1 for softer woods, 1 for hardwoods and end grains. ALL leaving little ridges or trails in their paths. When I got this one, I put it to the test. End grain cutting boards, perfect. Spoil boards, zero trails. Leveling and surfacing rough lumber, of all kinds, hard, soft and everything in between. Shallow depths (.050) to deep paths (.250). I mean I tried to break this thing and get a bad surface, couldn't do it. ...

TrueFlat - 1.25" Surfacing Bit - TF2125

Gary F.Verified

CIC is an amazingly good company. I have never been there and am not related but good things come out of there. The maple and walnut wood packs are excellent quality

Groove Master - 1/4" Shank - Juice Groove Bit

E E.Verified

It is a great project I use carveco maker so I can't use the tool paths which I knew before hand So with the tutorial and the file I'll be good to start it I live in northern Ireland so Metric is only used so most tutorials I have to convert from inches to mm but I noticed you have mm in some videos So thank you Thomas

Deer Inlay Digital File

Eugen D.Verified

Thank you for the great service, and the great quality products. I've used all but the veebit because I dropped it the moment I went to install it for the first time and chipped the tip, lol. The rest have been great and I'm very happy with them. Thank you!

CNC Router Starter Set – 5 Must-Have Bits for Beginners

Ruth W.Verified

These are great feet that will elevate any larger project. My only wish is that they could make/offer smaller versions for small projects (maybe 1/4, 3/8, and 1-2 inch sizes).

Premium Cutting Board Feet - Brass/Stainless Steel

Randy D.Verified

Fun project. I have made three clocks so far and keep getting more requests. Easy to customize and everything you need is in the box. I do recommend a good 60 degree V Grove and CIC has one that works great.

Custom Wall Clock CNC Kit

Customer photo review of V-Carve Inlay Bit Set

Allan B.Verified

The bit kit is a no brainer for picking tools. The 3/16 bit is now my go-to choice.

V-Carve Inlay Bit Set

Kurt G.Verified

Bits work great for detailed inlay projects. Broke a tip off my first going too fast. Ordered several more for in case I push the limits again. Gotta keep “cutting it close” to the edge!

30 Deg V-Groove - 3-Flute - 1/4 Shank - VSC30

Charles T.Verified

I loved the press the one time I used it. Absolutely brilliant design. I cheaped out and used garbage plywood. It worked great the one time I used it. Ha The next time I am in “town,” I will grab better plywood. I recommend this file to anyone that is doing or wants to do inlays. Enjoy your youtube channel. Keep up the great work. 5+ stars

Inlay Press Digital File

Kevin S.Verified

I am getting closer to starting the project. Thanks for all your help. You guys are awesome! Keep up the good work. I look forward to buying additional products from you in the near future. Thanks Kevin Sego

Kids Rocking Chair Digital File

Michael T.Verified

I haven’t used the lumber yet but was pleased with the quality and condition of it. I’ll be using it soon and will definitely purchase from CIC in the future.

Premium (4/4) Hardwood Lumber Pack – Free Shipping | Multiple Species

Customer photo review of Custom Inlay Builder (18"x12")

Rocky Y.Verified

It had a few blemishes voids in the wood I wanted to fill didn’t realize epoxy would spread so far with end grain didn’t care for that but other wise it turned out good

Custom Inlay Builder (18"x12")

Kathy H.Verified

I love the custom inlay builder. It is a great price and allows me to get straight to work. The quality of the wood, sanding, smoothness, perfectly square and high quality grain. I will purchase again.

Custom Inlay Builder (18"x12")

David W.Verified

As i am a UK customer shipping to a USA address(myus) then onto the UK may i suggest some polystyrene or 3mm ply around the edges of the packing Just to protect those lively crisp corners and faces Quality Excellent Cant wait for the next shipment to arrive in the uk PS Good luck with the new venture !!

Custom Inlay Builder (18"x12")

Wade T.Verified

Sorry always forget the pictures but yeah the templates are spot on. It was a fun project for a guy I know is retiring I think he'll get a kick out of it.

Wall Clock Set - January

Grady G.Verified

The material is great quality with few blemishes. It is square and is sanded to 170 I believe. The boards are worth the price. Purchasing materials to make my own end grain boards, jointing/planing, glue up time, sanding, is expensive in both materials and time. I highly recommend

Custom Inlay Builder

Customer photo review of 🔥Interactive Maze Game Builder Kit - BamX™🔥

Justin B.Verified

Great experience, this was my first time purchasing a file online and using these materials. Looking forward to more monthly kits!

🔥Interactive Maze Game Builder Kit - BamX™🔥

Jason C.Verified

These cutting board feet are rock solid. As a woodworker that makes and sells many different cutting boards some being expensive boards, I wanted To have feet that looked great and were rock solid instead of your normal rubber cutting board feet.. Found Em!!!! Check cic out, it’s worth it

Premium Cutting Board Feet - Brass/Stainless Steel

Edward K.Verified

Truly impressed with the service and quality of your products. I received the wenge pack and was touched to see a personal note from "Mama D". It's these little things that set a company apart from the others. The little extras go a long way and this customer was impressed. Plus the wood was simply gorgeous. I usually do my own milling so getting beautiful S4S boards is a treat. Living on an island in Hawaii is exceptionally beautiful, but woodworking resources are scarce. The fact that ...

Premium (4/4) Hardwood Lumber Pack – Free Shipping | Multiple Species

Robert Z.Verified

My cnc is 600x900cm cm so I had to modify the pattern by rotating it 90 degrees and cutting out only half of the design twice. It took a little extra work but was worth it. It has made my job of keeping the inlay tightly inserted while the glue set much easier. It is easy to use. I doubt that I will take it apart to store because I make a lot of inlays. Great design!

Inlay Press Digital File

Customer photo review of July American Flag Eagle Kit - HDPE

Scott T.

First real project I ran on my AltMill, files worked great, project turned out great. Thanks for putting it together!

July American Flag Eagle Kit - HDPE

Lawrence D.Verified

The walnut panels are my favorite. I have a small shop, I can mill rough lumber but the time I save with the prefinished panels saves time and money

Walnut Panel

Customer photo review of Custom Inlay Builder Kit

Donovan C.Verified

Great experience, great customer service, great products. Everything from the detailed videos on YouTube to the personal hand written note was excellent.

Custom Inlay Builder Kit

Customer photo review of Deer Inlay Digital File

Cheryl N.Verified

Small problem we carve file call support and Brenda was very nice and professional sent out new file and bam it carved great. If you have not bought there bits you don’t know what your missing

Deer Inlay Digital File

Paul M.Verified

First time making a cutting board and seen horror stories of people making a mess when cutting the juice grove. Took my time, made shallow passes and had minimum sanding when done.

Groove Master - 1/4" Shank - Juice Groove Bit

Rob A.Verified

I have not used the round over but I expect it to be perfect. The trays I made turned out great. These bits are fantastic. Smooth, clean cuts and no tear out. Highly recommend. It's all about the bits. Buy quality and great projects happen.

Bowl and Tray Bit Set

Eric M.Verified

Bam x works great on my cnc, people love the look. I love the fact of no staining or sanding.

BamX - Bourbon

Roy D.Verified

I ordered a set of brass feet for my cutting board. When I went to install the feet the screw holes in the feet were just a little too small and one the screws broke anyway I fixed the problem. But I went ahead and sent an email to CIC and told them about what had happened in response they sent me an email apologizing for the problem and that they had checked it out and corrected it. At that time they sent me 2 additional packages of their cutting board feet with the correct size of hole for th...

Premium Cutting Board Feet - Brass/Stainless Steel

Customer video review of Groove Master - 1/4" Shank - Juice Groove Bit

Louis F.Verified

It cuts great grooves that require no sanding . But the extra wide corners where I open it up to for the extra juices to flow it doesnt do well. So I had to use my bowl bit to clean up that area

Groove Master - 1/4" Shank - Juice Groove Bit

Carl J.Verified

First off, I love the project and cutting out the roof went very well. Then I started on the walls four retries and carving on both sides later I finally got it right. The video is very vague in this area. It would’ve been very helpful if the peace was truly squared 12 x 12 that would’ve saved me a lot of screwing around but anyway, thanks for asking. PS I love the bit.

1/8" x 1/2" O’Flute - 1/4" Shank - OF215

John W.Verified

Wanted to smooth my spoil board, purchased a fly cutter off the Internet, wasn’t very happy with it. The one from cutting it close left no lines, no marks and it’s longer shank made it easier to remove a couple gouges in my spoil board. I appreciate the good service and I like being able to use the tool database.

1’’ X 1/4’’ Surfacing & Flycut - 1/4’’ Shank - SURF1

Ernie B.Verified

The digital file was fine. I bought a very nice starter kit at the same time. I managed to cut the pocket pattern rotated by 90 degrees which of course ran off the wood. I cleared off the bad pattern and ran it properly. Next I ran the plug pattern, every thing went perfectly until I realized that I forgot to mirror the pattern. At his point I ordered another starter kit, I plan to wind up with 2 inlay cutting boards that are mirror images of each other,

Deer Inlay Digital File

Bobby S.Verified

I’ve purchased several different hardwoods from CIC Workshop and the wood is always beautiful and perfect for whatever project you are using it for. Buy it you won’t be disappointed. Keep up the great work CIC.

Premium (4/4) Hardwood Lumber Pack – Free Shipping | Multiple Species

Charles K.Verified

Unfortunately, I have not yet had time to make this project, but I will say I am quite impressed with the details provided in the package. The files and material are exactly what was expected. I'm an experienced CNC user, so I do not expect any issues when cutting this. However, for those just starting or with little experience, it might be nice to offer a reduced price on replacement pieces in the event their is a cut problem. Perhaps they are already available (I did not go look on the ...

July - American Flag Eagle Kit - HDPE

Customer photo review of Hard Maple Panel

Louis F.

Wrapping up another awesome project 24 inch custom clock Made from 24x24x.75 Maple panel from CIC Superb Product!!! Louis Flores lonestarcnccreations.com

Hard Maple Panel

CIC Workshop ReviewsVisit store