CIC Workshop ReviewsSee store reviews

A well made product that was perfectly priced and great looking, even if it is on the underside of the cutting board on the counter. I know they're there though . .

I ordered 2 of the exotic Lumber packs. Padauk was flawless! Yellow heart had issues with color and quality but Brenda went out of her way to make it right and even sent me a couple bits which was more than a fair resolution. What impressed me most was her great communication and positivity! Great Job to the CIC TEAM! I will always support you!

Used these combo endmills to cut out Center Project in your 3 Inlay Kit. worked fantastic! Still waiting on hearing from CIC why I can't route the other two projects. Have wrote several times. Perhaps you could just send me the individual files for the USA and Deer Inlay. Thanks Gary Hulsbrink [email protected] 810 931-8899

It has been about a year since I purchased my Shapeoko Pro 5, and until recently, I had been using inexpensive bits. After switching to the bits from CIC, I am extremely impressed with their quality and the higher speeds and feeds I can run while still achieving a smooth, clean finish. I won’t be going back to cheap bits—these deliver excellent performance at a great price. CIC also provides outstanding customer service.

I haven’t cut them yet. I have three. Working on a Christmas ornament project for my son in law. He’s a WHP Captain and the ornaments are for his staff.

I wasn't able to complete the project in Cut 2d, but, I am in the process of upgrading my machine and software shortly. I will post when thre carve is complete.

Used it on 18 different cutting boards of various sizes so far. Bit performed exactly as advertised. Easily varied the groove edge contours by adjusting the bit height, as advertised. Sweet bit. Well worth the cost. Gonna get a lot of use.

This .125 DC bit does a great job as a clearance bit leaving a very clean finish on the top edge of the project. Like all the bits I've ordered from CIC Workshop it did not dissapoint.

Came out great, pieces went together really well. Ended up donating the eagle to a middle school vice principal to put in her office. The only thing I think that would be great is a little more room at the top to place some words. Did not think to do this until after cutting everything out. I think “We the People” or something similar would have been cool

The canary wood cutting board is beautiful and solid. It is a different option from many of the common boards seen most often. I have not used it yet but am looking forward to using it with a custom inlay design.

These new style of feet really step up the overall appearance and the “wow” factor of my cutting boards. They are much nicer than the standard rubber feet that most boards have. Will be ordering more soon to put on my other boards that I am making.

I haven’t yet finished my project(s), but the quality of this birch plywood is great for laser cutting and laser engraving. I’ll post pictures after I finish. Nice stuff.

The cutting board brass feet looks great, elegant and professional made. I haven’t been able to used them yet, but they are going to be for a very unique boards.

The feet worked beautifully. The holes for the screws need to be slightly larger as I had to drill them out otherwise they worked perfectly and look fantastic on the cutting board. When my wife is happy I’m happy. LOL

We have a cast concrete company and I need to cut out intricate molds for fireplace mantels. I'm new to using a cnc and trying to learn the proper bits, feeds, and speeds. I've blown through a number of endmills cutting melamine and plywood using the wrong speeds, etc. I saw this bit online and gave it a try. Holy crap this thing cuts awesome! I'll be ordering some more in the future. Really liked the hand written note on the cool engraved board. Thanks for being an awesome company!

Did a craft show a couple weeks ago and made myself a house # took it to display and made a great hit postmaster saw it and ordered one and told me to put a sample one in post office I did got several orders and not all same color some wat blue some red some black some green its a simple project set it up just change #'s

The bit's quality is superb - it does removal of the material very quickly and efficiently. I use it on all kinds of fine projects where I need the bulk of the material to be removed quickly before I get to fine details. All and all, it is an excellent product, although my wife was little suspicious of the title without knowing it is a CNC tool...

All of the bits I have ordered from the CIC workshop have worked awesome. I couldn't be more satisfied. I will continue to purchase any bits needed for my CNC operations from them.

The bits performed very well. The 3/16 bit did very well clearing out on both end grain and side grain boards. The v-bit cut very clean . Both bits stayed very sharp throughout the operation. I am definitely satisfied with the quality.

I don’t have a table saw to use at the moment, so I was excited to see that I could still make cutting boards for friends but ordering the kit! The pieces arrived sorted and bundled, with a handwritten note. The pieces themselves are great pieces, very excited to get my projects going!

I haven't used the project yet. Not even sure when or if I will. I like to support family businesses and buying smalls is one way I can show my appreciation to your company. Thanks for all that you all do for the cnc community. Keep it up, Marc

File downloaded Nd cut fine. I wanted to use for inlay cutting board, but thought a few of the lines were too shallow to work well with 30 degree vbit. Shallow angle TBN would be better, but would lose sharp points. I ended up using black epoxy and cutting board is Ok.

So far I have loved every project file I have gotten from CIC Workshop. I especially love the kits, but I do prefer to have just the digital files with the specs for the wood at times for some of the kits. The wavy flag is an example. I would prefer to have the digital files only and make my own blank from some different woods. Great job regardless!

The file loaded into my CNC with no problems, once the board was centered, it was off and cutting!!! I used my grandkid’s white crayon to grease each joint area to help slide them together! Great fit, I’ve already pressed in my first inlay with excellent results!

can't show you the finished project. (haven't started yet.)but I'm sure these barrel hinges are just what fits the build. thank you for your prompt service! m. labonne @ [email protected]

Shipping was quick and the inlay kit was packaged well. The boards are as flat as can be and ready for milling. I would like to see no sap wood in the walnut glue up but it’s not a deal breaker. I would also like to have options for larger boards. I like a 18” x 24” x 2” board more often than not. These are great quality and will save you tons of time. Will definitely be ordering more.

Quality workmanship! Solid heavy brass legs for charcuterie boards made as gifts to family members. The legs enhance the project, giving the boards an elegant look! Thanks for such a great addition to my project!

Made on the new Onefinity apprentice. You need to review it. It is great as a beginning machine. Your files worked great. I will be returning as a customer. Keep up the good work I love your videos.

Haven’t had a chance to run this one yet, but based on my experience with the other CIC bits, I have zero concerns. The grind quality and consistency on the rest of their lineup has been excellent, and they’ve handled hardwoods cleanly without chatter or burning when dialed in correctly. If this performs anything like the others, it’ll be a solid addition for tighter detail work and smaller toolpaths.

Everything arrived in perfect condition. The base and inlay blanks were nice and flat and the glue joints are astounding. Keep up the good work and I look forward to the next project.

I have used this 1/8th bit to run some profiles and also to rough out a few 3D carves and so far it has worked very well, so I am pleased with it. Thanks Mike

I use these as a wood canvas, cover in white gesso and then oil painting. They are perfect size and thickness. Order was processed and delivered quickly. That all I really wanted, a product that's good quality and a company that ships out in a timely manner.

I'm afraid my project was a fail. I didn't notice that the vac housing was going to hit a hold-down bracket until it was too late and this led to a cascade of problems. I'm going to try again with some new materials as soon as said materials arrive. Stay tuned