CIC Workshop Reviews - 1,716 Reviews | cicworkshop.com

CIC Workshop ReviewsSee store reviews

Visit store
Customer photo review of 1/64 Radius - 6.2 Deg 3D Tapered Ballnose - 1/4" Shank - TBN1-64
Jason A.Verified
Absolutely love 1/64th tapered ballnose bit. This was my first time trying it out on a project (after a few small test pieces). Thanks for all your videos and offering such high quality products. And it was a pleasure meeting you all at the Texas Woodworkers Fair that was in Austin.
1/64 Radius - 6.2 Deg 3D Tapered Ballnose - 1/4" Shank - TBN1-64
Customer photo review of šŸ”„November - Classic Game Box - BamXā„¢šŸ”„+4
Timothy K.Verified
Great Project of the month for a wide audience of users. With Dominos, Playing Cards, and Dice, all included in a handsome caring case, the project suits a wide audience from the very young, to the very old, and everyone in between. Fantastic! Thank You CIC WORKSHOP
šŸ”„November - Classic Game Box - BamXā„¢šŸ”„
Customer photo review of Premium Cutting Board Feet - Brass/Stainless Steel+2
Frank W.Verified
This was the first time using these cutting board feet after years of using the cheaper plastic ones. The order arrived on time with some stickers and a great note introducing me to CIC. For installation, I used a forstner bit to make a counterbore in the board to keep the overall height lower, and the stainless steel looks fantastic against the maple. Interestingly, I had previously made a cutting board for this customer using the plastic feet, and when she saw the stainless ones, she immediate...
Premium Cutting Board Feet - Brass/Stainless Steel
Customer photo review of Premium Cutting Board Feet - Brass/Stainless Steel+4
David W.Verified
No matter the project, whether itā€™s a base for a sharpening jig, a fun cutting board or even a massive cutting board, these feet elevate the project, keeping it steady and truly finishing it off in style.
Premium Cutting Board Feet - Brass/Stainless Steel
Customer photo review of Wall Clock Set - January
Andrew C.Verified
I'm having a blast. The first clock I made my wife had a great Idea. She's on a 50 year reunion committee for her high school and they were looking for door prizes. This will make a great gift. On to the next project I go.
Wall Clock Set - January
Customer photo review of Premium Cutting Board Feet - Brass/Stainless Steel+3
Steven W.Verified
Above and beyond expectations hardly describes how happy I am with my order. I came by this site from a woodworking subreddit and then checked amazon and found options, but figured I'd buy here since the cost was comparable and seems like it'd be better quality and I regret nothing. The stickers and note that came with it were icing on the cake, and I love supporting businesses like this, so 10/10, 5 stars etc... Great job!
Premium Cutting Board Feet - Brass/Stainless Steel
Customer video review of šŸ”„Interactive Maze Game Builder Kit - BamXā„¢šŸ”„
Marty M.Verified
This maze kit was 5 star all the way! The great quality materials and clear instructions made this kit a joy to assemble. I even made a video of the process for my YouTube channel, Mitchells Woodwork. Check it out! https://youtu.be/8oUykXGlwYY
šŸ”„Interactive Maze Game Builder Kit - BamXā„¢šŸ”„
Customer photo review of Custom Inlay Builder Kit
Matthew J.Verified
These inlay kits have an excellent quality and finish to them. The glue lines are very tight and the wood defect free. This particular one did have a dark spot that ran all of the way through the maple but I was able to hide most of it in the design. I will definitely be buying again.
Custom Inlay Builder Kit
Customer photo review of September - Complete šŸ”„Inlay Starter KitšŸ”„
Matthew J.Verified
Excellent quality as usual but my design was a little too ambitious for such a small board. Everything still came out really good but some of the details were a little too small and are not as crisp as I would like.
September - Complete šŸ”„Inlay Starter KitšŸ”„
Customer photo review of *LIMITED* Premium Wenge Inlay (Top Board)
Robert S.Verified
Great quality inlay blanks and at a fair price, Thank you! 13 x 19.5 x 2.5 deep inlays Charcuterie board, CIC custom bottom(pocket) board - Sapele, with CIC tops (plugs) - Wenge, Padauk, and Guatambu.
*LIMITED* Premium Wenge Inlay (Top Board)
Customer photo review of Custom Inlay Builder
Bryan B.Verified
I really enjoy making inlay cutting boards. Buying the supplies needed from CIC makes it very easy and speeds up the process. I am so glad that I have found a company that makes quality stuff and supports their customers.
Custom Inlay Builder
Customer photo review of Premium Cutting Board Feet - Brass/Stainless Steel+1
Brad S.Verified
These are very nice cutting board feet and if you're gonna make a premium high dollar cutting board then you need premium cutting board feet that match the board and don't look cheap and these are just what I needed.
Premium Cutting Board Feet - Brass/Stainless Steel
Customer photo review of ColorCore HDPE Plastic - Premium Multi-Layer Engravable Sheets
Gene W.Verified
Was very happy and pleased with my first experience using the multilayered HDPE and can see many future projects where i can put it to use. The mailbox numbers doing a two sided project was good learning experience as well to ensure the numbers were oriented correctly. I did some tweaks to my program after this prototype cut so my next one should look even better.
ColorCore HDPE Plastic - Premium Multi-Layer Engravable Sheets
Customer photo review of 1/16"x 1/4" Upcut - 1/8" Shank - UC1025+1
Christopher C.Verified
The bits from CIC Workshop are quality and they cut so nice! I love these guys and they are my first choice for my CNC projects! You canā€™t beat their customer service too!! Thanks CIC!
1/16"x 1/4" Upcut - 1/8" Shank - UC1025
Customer photo review of September - Complete šŸ”„Inlay Starter KitšŸ”„
Thomas M.Verified
Love the smaller cutting boards. I hope in the future youā€™ll be able to offer them, from time to time, as a product. I learn from your beginner inlay cutting boards video how to make a detailed inlay using an entirely level CNC. In my case a Long Mill MK2. Thank you for the great work and service. TAMerzt
September - Complete šŸ”„Inlay Starter KitšŸ”„
Customer photo review of September - Complete šŸ”„Inlay Starter KitšŸ”„
Bryan B.Verified
I really enjoyed this project! I wish they would continue to offer the kits on their website. I have people that want me to make them one but I don't have access to anymore kits.
September - Complete šŸ”„Inlay Starter KitšŸ”„
Customer photo review of Wall Clock Set - January
Danny G.Verified
The files were east to convert to my program and worked perfectly. I is a fun and easy project to do. Everyone loved it, I now have several more to make
Wall Clock Set - January
Customer photo review of šŸ”„November - Classic Game Box - BamXā„¢šŸ”„
Dr. C.Verified
Every Christmas, like Santa, I try to make something in my workshop for my 3 grown children. Now, I make really nice stuff, but I think they are a bit tired of my ā€œWood S__tā€, as one of my kids joked before Christmas (truthfully, her house is filled with my stuff). Let me tell you that this year, they absolutely loved what they got from old dad. Now, I forgot to take pictures of all of them, but got one last night while my son-in-law taught us how to play dominoes. You can see the laser engravi...
šŸ”„November - Classic Game Box - BamXā„¢šŸ”„
Customer photo review of Premium Cutting Board Feet - Brass/Stainless Steel+3
Stephen J.Verified
Beautifully machined part with the rubber insert added to my project in form and function. The brass screws are small and brittle. They snapped even in predrilled hole. Replace them with stronger screws.
Premium Cutting Board Feet - Brass/Stainless Steel
Customer photo review of šŸ”„November - Classic Game Box - BamXā„¢šŸ”„+1
Francis T.Verified
This is a great beginner project. The file is set up with no modifications needed other than picking your bits. Literally had this cut and complete in less than two hours. The latch was the hardest part. lol.
šŸ”„November - Classic Game Box - BamXā„¢šŸ”„
Customer photo review of Wall Clock Set - January+2
Kent A R.Verified
Cut the I'm retired. It went great. Didn't pay attention for when I cut the 5 o'clock starting spot and it moved up and I cut a couple of 5's in the wrong spot before I stopped it. Took a couple of corners off the retirement clock and made some male inserts following Ryan's inlay video and glued them in. Still need to clean that up and start over on the other side. I have fixed the tool path and picked up a couple of pieces of wood from home depot and cut both out without having any problems. I...
Wall Clock Set - January
Customer photo review of Deer Inlay Digital File
Johanna L.Verified
Very good inlay file. Inlayed with mahogany veneer into maple. Did the inlay with a 20w diode laser. Engraved the maple to .5 mm and did the mirror image of the deer and inverse and burned the inlay. put the veneer onto Aluminum tape before cutting out pieces and then just glue the veneer into the maple and let dry. Remove aluminum tape and sand and it is perfect.
Deer Inlay Digital File
Customer photo review of Exotico Panel
Randy D.Verified
Ordered this panel for the November Classic Game Box project and loved it. The panel was flat, well glued, amd easy to work with. The box has matched gain on the ends and that really gives it a cool look.
Exotico Panel
Customer photo review of O'Flute Bit Set
Max J.Verified
I love the HDPE material with the different color choices. This alone brings a wide range of ideas for projects. I find it much sharper when using the O flute type bits. Project comes out very very nice. Highly recommended!
Oā€™Flute Bit Set
Customer photo review of šŸ”„November - Classic Game Box - BamXā„¢šŸ”„+1
Michael K.Verified
These game kits are easy to make and the finished results are very gratifying. All the components provided by CIC are excellent quality! I made 7 kits and they carved up quickly.
šŸ”„November - Classic Game Box - BamXā„¢šŸ”„
Customer photo review of šŸ”„Interactive Maze Game Builder Kit - BamXā„¢šŸ”„+1
Mark W.Verified
The project was awesome. I think this monthly project is a great deal. Gives me an opportunity to create something I may not actually do. So thank you CIC for giving us these kits.
šŸ”„Interactive Maze Game Builder Kit - BamXā„¢šŸ”„
Customer photo review of ColorCore HDPE Plastic - Premium Multi-Layer Engravable Sheets
Bryan P.Verified
So easy to cut and the results were amazing, smooth edges and all. Iā€™m excited to try more of these product. The videos on how to use and cut this material was very informative.. thanks
ColorCore HDPE Plastic - Premium Multi-Layer Engravable Sheets
Customer photo review of Walnut Panel
Michael D.Verified
I've ordered many hardwood panels from CIC, and I have received great quality with timely delivery each time. Packaging is superb, and what a nice touch with a handwritten note. Keep up the great work, CIC team!
Walnut Panel
Customer photo review of Custom Inlay Builder Kit
Robert S.Verified
Great quality inlay blanks and at a fair price, Thank you! 13 x 19.5 x 2.5 deep inlays Charcuterie board, CIC custom bottom(pocket) board - Walnut, with CIC tops (plug) - Maple.
Custom Inlay Builder Kit
Customer photo review of Custom Inlay Builder Kit
Robert S.Verified
Great quality inlay blanks and at a fair price, Thank you! 13 x 19.5 x 2.5 deep inlays Charcuterie board, CIC custom bottom(pocket) board - Walnut, with CIC tops (plug) - Maple.
Custom Inlay Builder Kit
Customer photo review of Custom Inlay Builder Kit
Robert S.Verified
Great quality inlay blanks and at a fair price, Thank you! 13 x 19.5 x 2.5 deep inlays Charcuterie board, CIC custom bottom(pocket) board - Sapele, with CIC tops (plugs) - Wenge, Padauk, and Guatambu.
Custom Inlay Builder Kit
Customer photo review of October - Epoxy Christmas Ornament Kit
Luke D.Verified
Sorry for the late update. I ordered the kit then my previous CNC stopped working. I bought a new CNC machine (thank you for your videos reviews, they helped me decide which to get), and kept my fingers crossed I would get it before Christmas. These ornaments were the first official project I've done on my new machine. I'm very happy with how they came out. Thank you for putting the kit together and making my first project on the new CNC a success. Wishing you all a Merry Christmas! -Luke
October - Epoxy Christmas Ornament Kit
Customer photo review of September - Complete šŸ”„Inlay Starter KitšŸ”„+1
Paul C.Verified
My two very first inlay cutting boards. Learned a lot. These kits are great for smaller machines. The quality is exceptional. I picked up several more to fine tune my skills.
September - Complete šŸ”„Inlay Starter KitšŸ”„
Customer photo review of Custom Inlay Builder Kit+3
Dan S.Verified
I love this inlay kit. Yes, I could make it myself. Who has time for that? I will be ordering more in the future. CIC please get yellow heart back in stock.
Custom Inlay Builder Kit
Customer photo review of Walnut Panel+1
Michael C.Verified
I had a 24x24 inch lazy Susan to make a this was the perfect fit. We donā€™t get much black walnut in S Texas. The first shipment had a problem with a couple of joints but Slim made it right overnight by shipping me a new one no questions asked. The project came out perfect and the customer was very happy. Big Thanks to Slim and crew for the quick response. Thank you, Mike
Walnut Panel
Customer photo review of Custom Inlay Builder
Kelly M.Verified
It is always nice that I can buy your product when I am in a hurry to get a project done and don't have time to get a panel glued up. I will continue to buy support you guys.
Custom Inlay Builder
Customer photo review of October Kit- Epoxy Christmas Ornaments
Timothy L.Verified
This was a great cnc project! The ornaments are beautiful and fun to make. I scale a little bit and copied the 6 onto a 12"x28" scrap piece of Beliwood that are currently curing! The waiting is the only bad part about it!
October Kit- Epoxy Christmas Ornaments
Customer photo review of Mini Skeeball Table Digital File
William D.Verified
This was a fun project. The file was fine to work with. Itā€™s really designed to put on 4*4 machine but with a little knowledge I broke it up scaled it by 1.250 per inch. Then cut piece by piece. So over all mine is 23 inches long. Itā€™s well worth the price. I cut this project on a 4060 pro. I would recommend this to anyone who likes a little bit of a challenge.
Mini Skeeball Table Digital File
Customer photo review of Cherry Panel
John S.Verified
The quality is great. I haven't had any issues with voids or poor glue ups. Any questions or concerns are immediately addressed by CIC Workshop. I highly recommend their products.
Cherry Panel
Customer photo review of 30 Deg V-Groove - 3-Flute - 1/4 Shank - VSC30+1
Daniel F.Verified
I used the inlay bit set to create the Beastie Board! Very impressed with the bit quality and even more so with the customer service. My next project is building a display board for all the handwritten notes that come with every purchase. Iā€™ve found my new bit/accessory company.
30 Deg V-Groove - 3-Flute - 1/4 Shank - VSC30
CIC Workshop ReviewsVisit store