Motion Raceworks Reviews

Motion Raceworks ReviewsSee store reviews

Customer photo review of Billet Fuel Sump -12 ORB Single Outlet by Motion Raceworks 27-160+1
Pat M.
Great quality piece. Will be installing it this weekend to solve my fuel delivery issues. Machining is top notch and will not have any issues during installation. Thanks for guaranteed quality product from Motion Raceworks.
Billet Fuel Sump -12 ORB Single Outlet by Motion Raceworks 27-160
Customer photo review of T4 / S400 / GT55 Turbo Low-Pro Oil Feed Flange 21-10010
Mark P.
I bought this Motion Raceworks 21-10010 Low Profile Oil Feed Flange along with a MR 21-10008 drain flange. Both pieces look great and fit perfectly on my T03/T04 hybrid turbo. Nice work! -Marco.
T4 / S400 / GT55 Turbo Low-Pro Oil Feed Flange 21-10010
Customer photo review of Motion Billet T4 T6 Turbo Drain Oil Flange 10AN 21-10008+1
Mark P.
The Motion Raceworks 21-0008 Turbo Drain Oil Flange is nicely made, and fits perfectly on my turbo which is an AGP T03/T04 hybrid from CB Performance in Farmersville, CA. Because the turbo is mounted low in a rear-engine VW, oil drain back into the engine is difficult. This part with its machined-in funnel and o-ring seal, coupled with an Aeroquip short-radius 10AN hose end, solves a couple of problems and eliminates some potential others. For me, it’s money well spent! -Marco.
Motion Billet T4 T6 Turbo Drain Oil Flange 10AN 21-10008
Customer photo review of Billet Dual Channel In Line Flex Fuel Sensor Mount 6, 8, 10AN Sensor Not Included
Joshua P.
Going to make a great difference when it's time to install on my build. The ease of only needing 2 fittings to install a flex fuel sensor definitely saves the wallet as well as helps with limited space. MADE IN THE USA, what's not to love!
Billet Dual Channel In Line Flex Fuel Sensor Mount 6, 8, 10AN Sensor Not Included
Customer photo review of 1994-98 SN95 Mustang Strutless 15" Adjustable Wing 31-130+2
Dimitry G.
Wing is extremely easy to install and preping for paint was very simple a little etch primer and some quick sanding and it's ready to go however I would recommend a large rivet gun for the 3/16 rivets they are a bear with a handheld rivet gun. Overall I'm very pleased with the wing
1994-98 SN95 Mustang Strutless 15" Adjustable Wing 31-130
Customer photo review of Motion Raceworks Billet LS Valve Covers 10-120BLK
Steve B.
Love Motion Raceworks. Quality parts and great service. I’ve got their valve covers, steam kit and valley cover. So far no problems with any of their stuff. Just need to order the coil pack holders and catch can setup.
Motion Raceworks Billet LS Valve Covers 10-120BLK
Customer photo review of Motion Raceworks Black Anodized 2.5lb CO2 Bottle Bracket (Bottle Not Included) 25-10007
Jeff W.
Your product was very high quality and performed exactly as I hoped it would. I appreciate your help and I will be recommending you to anyone who asks me. Thank you very much
Motion Raceworks Black Anodized 2.5lb CO2 Bottle Bracket (Bottle Not Included) 25-10007
Customer photo review of ICON 92/95mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection
Joshua P.
Can't wait to install this great looking piece of American craftsmanship! The attention to detail on this throttle body makes it stand out from the rest! MADE IN THE USA had me sold on it!
ICON 92/95mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection
Customer photo review of Operator Billet Grip Insert Set Purple Anodized 16-143-05
Eddie B.
Purple shifter handle insert is awesome! It’s going into my 2006 Mazda truck with a 8.71 blown SBC and TH400 swap. This is a tribute build to my late wife. Her favorite color was purple, hence the shifter insert and the Purple Heart shaped steering wheel. Shipping was super quick, even out here in Maui, Hawaii. And yes, we do have an NHRA sanctioned 1/4 mile drag strip in our motor sports park. Thanks again!
Operator Billet Grip Insert Set Purple Anodized 16-143-05
Customer photo review of TH400 3 Speed Push To Shift Reverse Pattern Operator Series Billet Shifter Rear Exit+3
Eddie B.
I’m building a 2006 Mazda B2300 truck with an 8.71 blown Dart SBC and TH400 w/brake and Quick Performance 9” rear. I initially had a Hurst Quarter Stick shifter, but hated having to shift down. I noticed the forward shift M&M type shifters in the No Prep, and saw that you guys build one, so I had to have one! Thanks for a totally awesome shifter!
TH400 3 Speed Push To Shift Reverse Pattern Operator Series Billet Shifter Rear Exit
Customer photo review of Red/White Motion Raceworks Decal 8"x2"
Michael H.
I really like motionraceworks! I especially like the SNOT ROCKET!!!! Sorry I do not have pictures of anything that you have sent me. I simply was trying to win the beautiful Mustang you guys built for the giveaway. Because I’m too poor to buy one or build one. Thanks for all your products and all your content. I just wish that I was rich enough to have a hot rod. I have not seen anything about who WON. IT. My name is Michael Shaun Holland, 63 yea...
Red/White Motion Raceworks Decal 8"x2"
Customer photo review of Motion Raceworks ICON 102mm / 105mm Interchangeable Throttle Body - BLACK 10-140BLK
Hector O.
Very good quality throttle body as expected, but what's even more to notice is the attention to detail. From the throttle body finishing tool pass to the way the extra time is taken to TIG weld the three blade screws, to simply the way the order itself is packaged; you can immediately tell this company does things right. Instructions are clear & straight forward, final Q.C. checklist is HAND SIGNED, and no change or labor is spared. As a first time buyer/customer, I am very satisfied and pleased...
Motion Raceworks ICON 102mm / 105mm Interchangeable Throttle Body - BLACK 10-140BLK
Customer photo review of Motion Raceworks Billet Aftermarket Turn Signal Switch 15-140+2
Lawrence P.
I love the quality and workmanship of all the products I have purchased from Motion Raceworks. This turn signal unit is no exception. Exactly what I was hoping it would be.
Motion Raceworks Billet Aftermarket Turn Signal Switch 15-140
Customer photo review of Motion Raceworks Top Loader Billet Internally Baffled Oil Catch Can ( Single 12 AN Port )+1
Ron S.
I’m a follower of Cleetus McFarland on Facebook and tictok and he turned me on to your product so I decided to integrate your catchcan system into my 2021 GMC L5P Diesel PCV system Spel Lab delete and it worked out great thank you
Motion Raceworks Top Loader Billet Internally Baffled Oil Catch Can ( Single 12 AN Port )
Customer photo review of Gold Made in USA Shirt 96-144 Small - 4XL
Arbie H.
Wish I could show everyone a picture of me working on one of my Baby’s with a Moition shirt on but I am a big man and wear a 6XL tall . So I do the best I can by buying their shirts for my Buddy’s and give as gifts.!!! Love the custom parts that motion makes for and finish are always fantastic .!!!!
Gold Made in USA Shirt 96-144 Small - 4XL
Customer photo review of Motion Raceworks Single Push Button Steering Wheel Bracket 15-00004
Bryan C.
The staff was great and the products are quality made. , you don’t sell a bracket for the new edge mustang factory steering wheel but it was recommended that I order these brackets and adapt them to fit behind my cruise control switches. As you can see it worked out perfect!! Great support and great product!!!
Motion Raceworks Single Push Button Steering Wheel Bracket 15-00004
Customer photo review of Electric Shift Powerglide Operator Series Billet Shifter Rear Exit
Benjamin M.
Haven't had it on the track yet as it's going in a new build. It looks amazing and everybody is jealous!! Super excited to get it out on the track. Would love a t shirt for how jealous I am making our track peeps. 😜 In all seriousness, thank you for making an amazing product and I cannot wait to get back on the track. 🥰🥰🥰
Electric Shift Powerglide Operator Series Billet Shifter Rear Exit
Customer video review of Motion Raceworks Dual 10ORB Inlet Pre Fuel Filter w/ Mount (100 Micron) 27-173
Clifford B.
I bought the pre filter with two 10an inlets and one 12an outlet and the post filter with one 12an inlet and two 10an outlets. This makes it super easy to run dual feeds from the tank and dual feeds to the fuel rails. I have about 50 different motion raceworks products on my car and every one of them are made with amazing quality and fitment.
Motion Raceworks Dual 10ORB Inlet Pre Fuel Filter w/ Mount (100 Micron) 27-173
Customer photo review of 1982-92 Chevy Camaro Aluminum 15" Strutless Drag Wing 31-170+2
William P.
Even though it doesn’t technically fit 82-92 Firebird with just a slight tweaking it’ll fit like a champ and looks awesome. It just literally needs a slight bending further at outer edge to match curve and that’s it! Otherwise, matches right up very easy install and Motion Works is on point with a highly stable and well built rear wing it was an absolute great buy!
1982-92 Chevy Camaro Aluminum 15" Strutless Drag Wing 31-170
Customer photo review of Replacement Air Filter for Top Loader Catch Can
Allan B.
If you’re looking for an air filter for your oil catch can you’ve came to the right place! They need to call the ambulance because this air filter is so sick!! I would rather be dead than use any air filter on my 2007 850hp Z06 corvette! You are an absolute fool and a dummy if you try using any other filter! God bless this filter and god bless Motion raceworks for such an amazing air filter!!!
Replacement Air Filter for Top Loader Catch Can
Customer photo review of 3AN Bulkhead Flanged Pass Thru Fitting by Motion Raceworks 34-30303+1
Alexander C.
These are very nice flange bulkhead fittings but only for low pressure/ gravity fed applications. Not for brake line use. If you guys make stainless units that would be awesome ! Thanks !
3AN Bulkhead Flanged Pass Thru Fitting by Motion Raceworks 34-30303
Customer photo review of Motion Raceworks Catch Can Kit for MRW Billet Valve Covers+1
Larry K.
First off I reached out to customer service by email with my questions and they responded very quickly. Dalton was very informative and seamed very knowledgeable about the product. He was very responsive after are first initial contact as well as I had to check on a few other parts for the install. So all in all it was a great experience. Thanks again for the great product and support. Keep up the good work
Motion Raceworks Catch Can Kit for MRW Billet Valve Covers
Customer photo review of ICON 92/95mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection
Alexundre M.
Great quality overall. Love the modulatory and the addition of the 1/8npt port. Fits better than any I've ran so far. Throttle spring is surprisingly light. IAC channel is as close to stock as you can get, no idle or cold start issues and no screaming from the turbulence. My only regret is waiting so long to get it.
ICON 92/95mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection
Customer photo review of Motion Raceworks Coolant / Transmission Billet Overflow Catch Can
Pietro T.
Can’t say enough good things about Motion Race Works. Super knowledgeable and helpful staff that seems to have all the answers to the questions I’m asking. Tech tip Tuesday videos are also super helpful. Wrap all that up with the products being made here in the USA. That says it all for me.
Motion Raceworks Coolant / Transmission Billet Overflow Catch Can
Customer photo review of Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)
Bubba B.
Can’t be anymore happy with the setup. Looks awesome and performs just as well. Will only buy MR’s catch can and valve covers from here on out. Appreciate Dalton as well, he is the man when it comes to ordering, and will help you out in anyway.
Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)
Customer photo review of Fragola -8 AN PTFE Straight Hose End 680108-BL+1
Kirk S.
Ever since the first order from here it has been great! Fast shipping and very helpful if you call them with questions. The parts are second to none. Building a 2010 pro charged LSX camaro and 1969 K5 pro charged ls3 blazer. Can't wait for the next project on the 65 chevelle starts once these 2 are done.
Fragola -8 AN PTFE Straight Hose End 680108-BL
Customer photo review of United We Race Freedom Shirt
Chuck J.
Each thread carefully woven with 100% pure badassery 💪🏼. I’m often confused with Captain America when I wear this in public. I let my masked liberal neighbor try it on and he instantly vaporized into calcium dust. Product exceeded all expectations. Oh, almost forgot… FJB!
United We Race Freedom Shirt
Customer photo review of Remote Catch Can/Coolant Can Drain Kit+2
Lee A.
I recently installed this. The hardest part of the installation was figuring out where to mount it. Very easy install and will definitely make it easier to empty the catch can.
Remote Catch Can/Coolant Can Drain Kit
Customer photo review of 1994-04 Mustang SN95 / New Edge Parachute Mount 14-120
Paul W.
Excellent customer service answered all my questions with no hesitation. Product is awesome. Very easy to install. Good quality craftsmanship. I highly recommend motion raceworks and I’m going to be installing my Wing next. I have the SN 95 wing
1994-04 Mustang SN95 / New Edge Parachute Mount 14-120
Customer photo review of Sam's Spray Wax Kit w/ Microfiber Towel+1
David M.
I have used many different detail sprays. But Sams spray wax is my far superior to any other products used. At the local car show Saturday some regulars came up and said “ Wow looks like you polished her up” I said no just a quick detail with Sams spray wax and a microfiber towel!!
Sam’s Spray Wax Kit w/ Microfiber Towel
Customer photo review of Motion Raceworks 48" Throttle Cable w/ GM/Ford Pedal Attachment 18-141+1
Darrell T.
I took a chance and purchased this throttle cable for by 1973 Plymouth duster with a 3rd gen hemi Holley high ram and LS throttle body,because I couldn’t find any others online with good reviews and for a mopar lol, works great still doing some adjustments to get 100% throttle the quality is amazing built great
Motion Raceworks 48" Throttle Cable w/ GM/Ford Pedal Attachment 18-141
Customer photo review of Motion Raceworks Billet Aftermarket Turn Signal Switch 15-140
Chris D.
1987 s10 motion raceworks light weight column and turn signal switch fits better than stock and lost a little weight … just needed to add in a turn signal module from signal dynamics part #0103 and lights work as from factory. Very nice black powder coat on column. Very happy!
Motion Raceworks Billet Aftermarket Turn Signal Switch 15-140
Customer photo review of Motion Raceworks TWIN Wastegate Turbocharged CO2 Kit+1
Ryan W.
Great kit when paired with a dominator and holley high flow fill/vent solenoid. My only suggestions for improving this product is to: 1) Include plastic protective sheathing to go around the line to protect it from chaffing under the carpet 2) Make sure to notify customers in big bold letters to mount this vertically to avoid CO2 liquid going into your lines. 3) Include bracket options sort of like the ones I ordered off amazon so we can achieve those weird mounting angles. 4) Include the firewa...
Motion Raceworks TWIN Wastegate Turbocharged CO2 Kit
Customer photo review of Fluidworks Remote Oil Filter - Front Load Style+1
Joe M.
It was nice to be able to put the bracket on an angle of the firewall and clock the oil filter housing to where I needed. It worked like a charge. Recommend it to input way to clock in anyway you want it worked out perfect.
Fluidworks Remote Oil Filter - Front Load Style
Customer photo review of Motion Raceworks 1979-93 Fox Body Billet Aluminum Manual Master Cylinder Conversion Kit 20-10010
Eric T.
Nice easy set up to install, was a little tight on the front brake line to the strut tower, but if you take your time and use a tubing bender it works out just fine.
Motion Raceworks 1979-93 Fox Body Billet Aluminum Manual Master Cylinder Conversion Kit 20-10010
Customer photo review of Motion Raceworks Catch Can Kit for Billet Valve Covers 32-100MRW+1
Bryan C.
The staff was great to work with and the products are quality made. Perfect fit and finish and now I don’t have to worry about the PCV system managing any blow by or crankcase pressure. As you can see it worked out perfect!! Great support and great product!!!
Motion Raceworks Catch Can Kit for Billet Valve Covers 32-100MRW
Customer photo review of Motion Raceworks Catch Can Kit for MRW Billet Valve Covers+4
Nicholas P.
Kit was exactly what I needed. Perfect length of hose and everything appears to be great quality. Was looking for a great product over the cheap alternatives and found a product that appears to have some great engineering and understanding of application to perform to the standards you expect! Can’t wait to finish my build and see everything in action.
Motion Raceworks Catch Can Kit for MRW Billet Valve Covers
Customer photo review of Motion Raceworks LS Stainless Coolant Crossover Steel Steam Vent Kit 10-10005+3
Scott V.
The quality of the steam vent kit was top notch. Install was a breeze and took about 10 minutes! I love that everything needed, down to the gaskets were included. The kit looks great, and fits under my Holley Sniper mid rise intake with room to spare. I also like that it leaves room underneath to run my wire harness.
Motion Raceworks LS Stainless Coolant Crossover Steel Steam Vent Kit 10-10005
Customer photo review of Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)
Pietro T.
Can’t say enough good things about Motion Race Works. Super knowledgeable and helpful staff that seems to have all the answers to the questions I’m asking. Tech tip Tuesday videos are also super helpful. Wrap all that up with the products being made here in the USA. That says it all for me.
Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)
Customer video review of Motion Raceworks Billet Valve Cover Breathers Clear Anodized (Pair)
Seth K.
First thing my son and I have bought from you guys and we’re stoked we went with the catch can and valve cover vents! Thanks for making a killer product. Seth & Tyler Kemppe
Motion Raceworks Billet Valve Cover Breathers Clear Anodized (Pair)
Motion Raceworks ReviewsVisit store