Motion Raceworks Reviews

Motion Raceworks ReviewsSee store reviews

Visit store
Customer photo review of 1995-98 Chevrolet Silverado GMC Sierra Chromoly Lightweight Steering Column
Chris H.
Excellent quality as to be expected from Motion Raceworks. Fitment was spot on, the DD steering shaft was precut to the correct length. Just had to drill the 1/4" hole through the chromoly tube at the bottom of the column to affix the U-joint. Used all 4 factory column mount studs and hardware. Very easy install! Steering wheel is in a comfortable position and the quick release is secure!
1995-98 Chevrolet Silverado GMC Sierra Chromoly Lightweight Steering Column
Customer photo review of Motion Raceworks Billet Aftermarket Turn Signal Switch 15-140+2
Cole D.
I was looking for a Badass turn signal for my 1940 Chevy and this is Awesome!!! Matches the style of my custom bomber dash perfectly. The icing on the cake, they always pack a sucker in the box. Real treat for such a great product and customer service.
Motion Raceworks Billet Aftermarket Turn Signal Switch 15-140
Customer photo review of Motion Raceworks Remote Sensor Bulkhead, Dual Channel (Bare or Black Anodized) 18-10003+1
Chris K.
This was the perfect solution to my situation. I have a custom gauge cluster with its own sensor plugs and a Haltech ECU and I needed to split the signal for fuel pressure and boost. This lets me run two sensors supplied by the same data. Super easy to install, keeps things simple; a small custom bracket and it’s good to go. Thanks!!
Motion Raceworks Remote Sensor Bulkhead, Dual Channel (Bare or Black Anodized) 18-10003
Customer photo review of RIFE Liquid Temp Sensor 1/8" NPT DTM Connector 53-1000 (Coolant, Water, Oil, Trans Fluid, Fuel)+1
Joshua H.
I have the IAT and a few temp sensors. I prefer the DTM sensors over the factory stuff simply because of how easy they are to pin and service. Threads are sharp and snug tight with little effort. It is nice to know they are built in house and tested. I used the competitors stuff but buy what I can from Motion. They offer a fair amount for My OBS and they are helping me build stuff I love.
RIFE Liquid Temp Sensor 1/8" NPT DTM Connector 53-1000 (Coolant, Water, Oil, Trans Fluid, Fuel)
Customer photo review of Electric Shift Powerglide Operator Series Billet Shifter Rear Exit
Chris S.
Was actually surprised how easy it was to install. Took about an hour to install. Granted I can remove my trans tunnel which makes it easy to mount brackets for the cable. Do wish the cable was a bit shorter but it will still work fine. So all that is left is wiring and my car will be completely digital. No mechanical switches or gauges. Thanks Motion for making great products. Next will be a new brake setup. I have aerospace currently and I'm not real pleased with them.
Electric Shift Powerglide Operator Series Billet Shifter Rear Exit
Customer photo review of Operator Series Driver Side (LH) Button Mount for Front Exit Cable Shifter 16-14003+2
Walid A.
Ordered an operational reverse pattern, shifter for my Turbo OBS truck with a th400. Add the pole stand, trans brake red button and cup holders. The kit was super simple to install. Quality is amazing shifts smooth as butter with one hand and looks absolutely amazing. Changed the whole look of the inside of the truck. 100% recommended! Will be going in more of my cars for sure!
Operator Series Driver Side (LH) Button Mount for Front Exit Cable Shifter 16-14003
Customer photo review of Motion Raceworks 1979-93 Fox Body Dzus Hood Rails (38.75") (Black Anodized)
Jeffrey P.
Everything went excellent. Kit was great with top notch quality and theYoutube video from Motion Raceworks made it a breeze. Oh almost forgot, we thought the black anodized rails was a way to charge more but once the hood was installed it was very clear why you wouldn't want plain aluminum. = it would look out of place. Thanks, Jeff
Motion Raceworks 1979-93 Fox Body Dzus Hood Rails (38.75") (Black Anodized)
Customer's black Strutless Drag Wing with an adjustable wicker installed on the back of a Camaro in a garage.+1
Mike A.
The youtube install video was good i ended up using my own 3/16 rivets the ones in the kit didnt work well. Turned out good im happy with it
1993-2002 4th Gen Camaro 15" Strutless Drag Wing w/ Adjustable Wicker 31-180
Customer photo review of RIFE 5 Bar MAP Sensor 1/8" NPT
Brent H.
had to get these for a custom setup on my S6 & the quality is amazing. I also ordered under the wrong address, emailed them & customer service instantly changed it for me. 10/10
RIFE 5 Bar MAP Sensor 1/8" NPT
Reviewer's image of the dark blue Motion Establishment Shirt, showing the front logo and the back's wrench and ratchet graphic.
Vation S.
Motion raceworks merch is the bomb I get super great deals believe it or not I got this shirt for only $6 just can't wait to get some more awesome motion race Works parts for my 72 Nova
Motion Establishment Shirt
Customer photo review of ICON 102/105mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection+1
Shannon H.
Very nice throttle body. It was a lot more sleek than the other t body I was going to use. Very good quality and excellent finish. If you need a throttle body you can’t go wrong with this one.
ICON 102/105mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection
Customer video review of LS 3" OD Billet Overdrive Alternator Pulley 6 Rib 10-10042
Josh S.
Worked perfect. Used one of the included shims to get it set perfect and that was all that was needed. Killed two alternators at 6k and up and this has been flawless since. Idle charging was not affected at all. 10/10
LS 3" OD Billet Overdrive Alternator Pulley 6 Rib 10-10042
Customer photo review of SBC / BBC / SBF Catch Can Kit For 1.22" Push In Grommets+2
Terry W.
I have a 1969 Camaro big block. I had a tremendous amount of crank case pressure and your catch can kit solved my issue! This is a first class company for their customer service, performance, quality and packaging! Highly recommend to everyone! 👍🏻
SBC / BBC / SBF Catch Can Kit For 1.22" Push In Grommets
Customer photo review of Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)+1
Rj C.
I might not be the first Viper with your catch can, but it’s the first time I used your products on the Dodge. LS guy by trade but picked up my bucket list GTS and I trust your stuff. When I needed a can it was really a no brainer. Bracket gives lots of options as does the threaded fittings. I went simple push, but I like the idea of easily changing that up later.
Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)
Customer photo review of Motion Raceworks MPI Race Steering Wheel All Black MPI-DRG-R513-BLK-MRW+1
Rusty M.
The steering wheel and quick release hub are top quality! The fit and finish are perfect! If I have to give any criticism, I guess it would be the steering wheel is very slippery. It's like it has Armor All on it or something. Lol. I need to find something that will make it "grippier" without ruining the appearance of the steering wheel. All in all, awesome products....I will be ordering more parts soon!
Motion Raceworks MPI Race Steering Wheel All Black MPI-DRG-R513-BLK-MRW
Customer photo review of Fragola -16 AN Black Nylon Race Hose (By The Foot) 840016
Logan R.
Was very helpfull, and super easy to install. 26ft exactly to get a rear mount radiator for a bmw e46. I'd say get 30ft so you have room to route yours different
Fragola -16 AN Black Nylon Race Hose (By The Foot) 840016
Customer photo review of United We Race Freedom Shirt
Eric L.
Went to the finals at the New England dragway Jet cars under the stars weekend ...Proud to tune on Jeff "Jet" Simon's Top sportsman procharged equipped 1969 camaro . The loss was a tough one with the margin of victory being .0017 . That's the way it goes in one of the hardest categories in Dragracing!!! Big Thanks to Motion raceworks! I was proud to wear the new shirt!
United We Race Freedom Shirt
Customer photo review of Operator Button Billet Grip Insert Set Purple 16-144-05 (Button Not Included)+1
David R.
I absolutely love the feel and position of this grip and button. Easy install and does what it needs to do when needed. Thank you for the great parts!!! Dave Kids1st
Operator Button Billet Grip Insert Set Purple 16-144-05 (Button Not Included)
Customer photo review of Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)
Jason W.
Looks awesome. I have 12an fittings and hose so I used a reducer fitting to fit the -10. If the spacing was a tiny bit more between the ports it would be perfect. So i had to come up with a different fitting arrangement to run the -12 fittings. Im very happy with the breather’s appearance and finish. Mine mounts inside the fender anyway.
Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)
Customer photo review of Quick Seal Connector Kit 3" w/ 3 Piece Clamp and Weld Flanges 21-142
Joe S.
Fit was very nice. Easy to work with. Way better then the generic ones I purchased first. I bought the icon billet TB and saw the quality of the clamps and had to get the other two to match. Glad I did. Very expensive. But very nice. Happy with the purchase.
Quick Seal Connector Kit 3" w/ 3 Piece Clamp and Weld Flanges 21-142
Customer video review of SBC Catch Can Kit For 1.22" Push In Grommets 32-100SBC
Kristofor G.
This things is fantastic! I reached out with a question and not only did human and not a robot respond, they were able to help me, and provide good information. Kit had everything I needed. The install was very straight forward. The materials and parts were top notch. My 8.8 liter air pump above and below the pistons is very happy with this part. Will be back here shopping again! To show how it went: https://youtu.be/j2X4sbAiAlA?si=O53u8YQegirLlto-
SBC Catch Can Kit For 1.22" Push In Grommets 32-100SBC
Customer photo review of RIFE Quad Sensor Block (Choose Sensors)
Stephen D.
Motion hit one out of the park. The block makes hooking up 4 different sensor a piece of cake. Now I need to get another one to clean up the other side.
RIFE Quad Sensor Block (Choose Sensors)
Customer photo review of 1993-02 4th Gen Camaro/Firebird/Trans Am Parachute Mount+2
Marc S.
Install was easy enough you dont need a toilet paper roll to mark the bumper for hole on the Camaro it touches the bumper so it was even easier to mark and drill. Im very happy it's perfect
1993-02 4th Gen Camaro/Firebird/Trans Am Parachute Mount
Customer photo review of 1994-98 SN95 Ford Mustang Dzus Rails (44.25") Black Anodized 30-10008
Shawn S.
This Dsus rail kit is excellent quality and provides excellent fitment! My only suggestion is to make the adjustment slots .25 round holes for greater adjustments when aligning the rails.
1994-98 SN95 Ford Mustang Dzus Rails (44.25") Black Anodized 30-10008
Customer photo review of Motion Billet Gen V LT Valve Covers (Black Anodized Finish) 11-120BLK
Chris S.
I bought these valve covers strictly for function. Installed on a heavily modified LT4 boosted motor pushing 830 WHP. With the stock valve covers I was constantly overflowing the oil catch can and even spun off the track in one incident due to the overflow. These Motion Race works valve covers have more head room than stock, and the breathers are continuously baffled the entire length of the valve cover. The catch can is now connected to both valve covers and hasn't even collected 1 tablespoon o...
Motion Billet Gen V LT Valve Covers (Black Anodized Finish) 11-120BLK
Customer photo review of Motion Raceworks MPI Race Steering Wheel All Black MPI-DRG-R513-BLK-MRW
Galen L.
I am currently building a 71 chevelle drag car, this wheel, column and dd bar with u joints completed my steering system. The lock on the wheel is epic, wheel only goes on one way. So you can’t put it on crooked, no matter how you park. Shipping was fast, service was beyond fair. I will be doing more business with them.
Motion Raceworks MPI Race Steering Wheel All Black MPI-DRG-R513-BLK-MRW
Customer photo review of Motion Raceworks Billet LS Valve Covers+2
Shannon H.
These are a nice set of valve covers. I liked the coil bracket design. It is nice they have the an fittings already to use with the engine oil catch can. They fit great and has an awesome finish.
Motion Raceworks Billet LS Valve Covers
Customer photo review of Remote Catch Can/Coolant Can Drain Kit
Cory S.
The entire kit was perfect! Worked better than I expected and zero fumes smelled outside the car. Remote drain is easy to install and works as described. Fear nothing when it comes to these people. They have taken our frustration out of it. Thanks fellas for putting out a killer product
Remote Catch Can/Coolant Can Drain Kit
Customer photo review of Motion GM/Ford Bolt-On SFI Steering Quick Release Hub 5/6 Bolt Pattern 15-270
Matthew L.
Dalton is the man. Made buying effortless. Very high quality product. Have already spread the word on these quick release for those wanting one and for a 6 bolt steering wheel. Keep up the awesome job and quality product with great pricing.
Motion GM/Ford Bolt-On SFI Steering Quick Release Hub 5/6 Bolt Pattern 15-270
Customer photo review of Motion Raceworks Momentary Small Push Button w/6' Wound Cord (Red or Green)+1
Lawrence P.
Fits and works like a charm. I tied it in with my other 2 switches utilizing the Motion Raceworks Mono Cord System. It cleaned up the steering wheel and made the wiring so much more manageable. Thanks again for all the products you create. I am a big fan and utilize a lot of your components. Sincerely, Larry Peck - Georgetown TN
Motion Raceworks Momentary Small Push Button w/6’ Wound Cord (Red or Green)
Customer photo review of Motion Raceworks Billet SBF Valve Covers (Black Anodized)+1
Jeff F.
If you are frustrated like I was and searched high and low for a good looking set of valve covers with the option of a quality baffle with bungs for a breather/catch can system and don’t forget a screw on oil fill cap then the Motion Raceworks billet SBF valve covers are for you! They might be outta stock, they might not be on the production schedule, be patient get on the list! As I reflect back on my newest Motion Raceworks purchase whilst sitting on my throne I can honestly say the experien...
Motion Raceworks Billet SBF Valve Covers (Black Anodized)
Customer's red Operator Billet Grip Insert Set installed on a black shifter inside a stripped-down car interior.
Ryan B.
Went with the route of motion raceworks and dealing with Dalton in sales the dude is a great guy I call him now when I order parts but the turn switch, steering column, steering wheel, operator shifter, C02 shift kit, rife sensors. Everything is going great and fitting perfectly still have alot more parts to order and we'll it's a 1984 monte carlo ss
Operator Billet Grip Insert Set Red 16-143-06
Customer's black billet oil catch can with dual ports installed in a car engine.
Jim E.
1200hp S197 coyote can breathe. Thank you Motion Raceworks for the perfect solution to treating forced induction crankcase air. Now on to the traction issues. Merry Christmas to all of you.
Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)
Customer's black Motion Raceworks Catch Can Kit installed in the car's red engine bay.+3
William B.
Had mighty mouse but it wasnt able to keep up with crankcase pressure.. did some reviews and motion raceworks has what I needed !!! Easy to install .. quality is great.. large capacity!
Motion Raceworks Catch Can Kit for MRW Billet Valve Covers
Customer photo review of TH350 3 Speed Forward Pattern Operator Series Billet Shifter Front Exit+2
Christian K.
77 Camaro with console, Install went great, shifter moves smooth as silk. Huge upgrade from the ratchet shifter we were running. Don't have it on the street yet, we are sure it's going to be perfect though.
TH350 3 Speed Forward Pattern Operator Series Billet Shifter Front Exit
Customer photo review of Motion Raceworks Top Loader Billet Oil Catch Can Clear Anodized ( Dual 10 AN Port )
Frank F.
Awesome product. Easy to install. Looks really nice. Will be recommending your products and I will definitely order from Motion Race Works again. I had a question and the person that answered was very helpful. Thank you Motion Race Works.
Motion Raceworks Top Loader Billet Oil Catch Can Clear Anodized ( Dual 10 AN Port )
Customer photo review of Motion Raceworks Single Push Button Steering Wheel Bracket 15-00004
Tim O.
As always, great service and fantastic products! I added a second steering wheel bracket and button to let me stage/bump my car in now that it’s turbo’s. Thank you!
Motion Raceworks Single Push Button Steering Wheel Bracket 15-00004
Customer photo review of Billet Flex Fuel Sensor Mount Dual Channel In Line 6, 8, 10AN Sensor Not Included+2
William G.
Easy install, adding it to my Zeitronix Ethanol Content sensor. I don't have a return style fuel system so that's why I purchased it and installed on the inlet side.
Billet Flex Fuel Sensor Mount Dual Channel In Line 6, 8, 10AN Sensor Not Included
Customer photo review of SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
David K.
I had nice billet aluminum breathers but because my FE Ford makes some blow by it would slobber oil on the valve covers then the headers and down the block making the bottom of the car a mess after a while and mark its spot. These valve cover adapters fit nice and tight in the grommets to keep them stable for a 12 AN 90° elbow and hose, which has a bit of weight to it. I was worried about them wobbling or leaning over in the grommets. No problem with these. They look great, the threads are perfe...
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
Customer photo review of TH400 3 Speed Push To Shift Reverse Pattern Operator Series Billet Shifter Rear Exit
Brady K.
Great shifter and even better customer service. Easy install. My man Dalton made it so easy to purchase what I needed as usual! He was patient with me and helped me make a decision on what I needed. 12/10 on the customer service and will be returning.
TH400 3 Speed Push To Shift Reverse Pattern Operator Series Billet Shifter Rear Exit
Motion Raceworks ReviewsVisit store