Cheryl N.Verified
Used it with a slower feed rate and I didn’t have to sand and mad board look as if it was done by a pro
Thank if you haven’t bought any of these bits your missing out give them a try you will not be mad about the try
CIC Workshop ReviewsSee store reviews
Groove Master - 1/4" Shank - Juice Groove Bit
Thomas G.Verified
Working on the internals of some fly boxes made from 1/2" bamboo plywood and the larger bowl bit has been very useful. Will send a photo when I finished a prototype.
Bowl and Tray Bit Set
Randolph M.Verified
The stainless steel feet far exceeded my expectations. The feet are more like jewelry than board feet. The silicon inserts have my board planted to my counter. It simply does not move now, even when the counter is wet.
I have one small quibble. The provided screws are low grade and tightening them into rock-hard walnut without stripping the heads was not easy.
Don't buy some cheap feet from Amazon. These feet will last a lifetime. Highly recommended.
Premium Cutting Board Feet - Brass/Stainless Steel
William V.Verified
I'VE BOUGHT THESE QUITE A FEW TIMES AND LOVED ALMOST
ALL OF THEM. ONLY ONE PANEL HAD A 1" X 1" CHUCK KNOCKED OUT OF IT, BUT I DIDN'T WORRY ABOUT IT, I JUST
SHIFTED THE JOB IMAGE. AND A COUPLE OF PANELS HAD
SOME PRETTY DARK AREAS BUT IT'S WOOD. I FIGURE IF I
CAN'T WORK AROUND IT I'LL JUST SAY IT GIVES CHARACTER
TO THE PIECE. BUT OVER ALL THE PANELS ARE VERY NICE. AND A VERY GOOD VALUE AS WELL!! KEEP UP THE GOOD WORK, A LOT OF PEOPLE DEPEND ON YOU GUYS, INCLUDING ME!!
Custom Inlay Builder
Greg J.Verified
I will admit that I struggled a little with the Instructions of the bottle openers. I even called him to clarify, which vectors I use, and I was advised to use the vectors on the right. That didn’t seem to make sense since that was not properly aligned. I did end up using the images on the left and it came out OK. However, the depth of the Bamx was not .75 it was .76. Nonetheless I think the material is really good. I even bought two more sheets of it. Just consider the low end user like m...
BamX - Bourbon
Robert P.Verified
There's not much I can say that hasn't been said before, I should have gotten this sooner. I'm a hobbyist sign maker and this tool has cut down my cnc time by over 50%
Golden Boy XL - 1/4" x 1.5" Upcut Rougher
John H.Verified
Have used the bit a couple of times now and it performs as advertised. I am happy with the purchase! The thank you note from Mom included with the shipment was a nice touch and is appreciated!
Golden Boy XL - 1/4" x 1.5" Upcut Rougher
Charles J.Verified
I made three of these and they all turned out great already gave two of them away to family members and they loved them thanks for such a nice kit looking forward to the next one
🔥November - Classic Game Box - BamX™🔥
Kent U.Verified
I have not had the opportunity to make this kit yet, however, I can say this: Ordering was super easy, shipping was speedy and the kit arrived and was as I expected.
Can't wait to actually put it on the CNC... Until then!
Thank you,
Kent
Jan 2026 - Wall Clock Set
Bryce J.Verified
Great bit! makes a very nice easy to sand juice grove. I love being able to cut a small grove in a smaller board and larger grove in a bigger board, using the same bit.
Groove Master - 1/4" Shank - Juice Groove Bit
Keith W.Verified
Have not had a chance to use but it looks great. I am looking at using for a different form on the outer edge of several plaques I have in mind. Also think it would make a great internal detail on some shallow dishes I am thinking of.
Groove Master - 1/4" Shank - Juice Groove Bit
Carl J.Verified
It was great. I made a practice unit that following your instructions came out perfect but no mistakes so then I went ahead and made the one with the included wood, which is even better thanks.
Nov 2025 - Classic Game Box - BamX™
Bob M.Verified
I am very new to CNC and struggled with setting this up with a different clock face. I managed to get it.
Very pleased with the kit. I was an absolute blast to watch being cut. Thank You.
Jan 2026 - Wall Clock Set
Eric W.Verified
Cuts clean and surfaces better than a traditional ballnose bit due to the flat surface between the radius. I will be using these bits a lot in the future and I am thrilled with what I got. Thanks CIC workshop!!
Bowl and Tray Bit Set
Robert B.Verified
After a shaky start with equipment burps, (thank you Slim for walking me through the “loose screw” problem and then following up with me) I have completed about 4-5. I have another 8 to go. Wife wants at least 5 for Christmas presents and the rest will be sold. Great kit! Thanks.
Aug 2025 - Interactive Maze Game Builder Kit - BamX™
+2Larry P.
Tortilla press was very easy to carve out using the Onefinity CNC. vCarve Files were perfect and explained very well in the video. Thanks for your attention to detail.
Tortilla Press Digital File
Nick P.Verified
The bit is amazing, it's just a shame I can't use it yet. Went to fire up the cnc machine and homed it, put a roughing bit in, did my usual centering, hit start...no start. I looked around everything, unplugged and re-plugged everything, checked for updates...nothing. Turned out, my spindle said no more. Out curiosity, i took it apart...hit definitely got hot. I want to try it bit i will definitely hit you up for a revised review once im able to get a new spindle.
Groove Master - 1/4" Shank - Juice Groove Bit
+4Matthias S.
excellent in all aspects, perfectly ready-to-use sanded surface, precise measures, glued to perfection without gaps, breaks or residues, sturdy...
Custom Inlay Builder
William H.Verified
Looks good and fits perfectly. Nice finishing touch for five jewelry boxes.
Ordering on line was a breeze and delivery was fast.
My direct communication with CIC staff couldn't have been any better.
Barrel Hinges - Pack of 6
Karen L.Verified
This bit works great and I love that it is just a little longer than my other 1/4" end mill bits. This is one of the bits I use all the time now.
1/4’’ x 1’’ Downcut - 1/4’’ Shank - DC221
Daniel D.Verified
Just getting into inlays, and watched the tutorial. The process was well laid out, and looked like something I could do, with the right bits. I bought the ones recommended, and they’re great. Still perfecting my own inlay technique 😁
Golden Boy - 1/4" x 1" Upcut Rougher
Greg S.Verified
I took several items made out of this material to a show and they were the 1st 4 things I sold. People raved about the color and the look.
This is GREAT.
Question: Would you ever consider doing a walnut and maple with varying or graduated stripes.
Exotico Panel
Johnny/peter P.Verified
The boxes came out perfect. Tool paths were exactly as described. It’s so enjoying to build something from CIC and know it’s going to work flawlessly. Thank you Ryan for the great products you put out. Will continue to watch and buy from you.
Johnny
🔥November - Classic Game Box - BamX™🔥
Jeremiah K.Verified
The bit was better than I thought it would be. And love how you provided all the settings for optimal running of the bit. Just wish you had a set of all the tapper bits.
3/16"x 3/4" Upcut - 1/4" Shank - UC2875
+1Ray B.
I increased the size and added a game called Left, Right, Center. I also added a clasp and epoxy inlaid their name. Great kit, love the concept.
🔥November - Classic Game Box - BamX™🔥
+2Justin V.
Great product. It did warp a little bit. It might have been my fault I’ve had this pice sitting in my garage for almost a year and it was about 25° when machining.
BamX - Bourbon
Jesse M.Verified
The 0 flute bits cut through the colorcore material like butter. They leave a smooth edge and the only clean up needed was to cut the tabs off. I tried to run the same material with a different bit and spent hours cleaning the grooves out. These bits are definately a must.
O’Flute Bit Set
Kevin L.Verified
Who doesnt love a beautiful piece of cherry with its warm tones and smooth finish. This panel is a breeze to work with. The quality is unmatched Love it! I highly recommend this panel!
Cherry Panel
+1Ben V.
Love the hdpe plastic just which I had a bigger machine and have ordered a lot of stuff and have loved all of it
ColorCore HDPE Plastic - Premium Multi-Layer Engravable Sheets
Pete M.Verified
Love the new CIC Hat - I have ambition to do more woodworking and leaning on CIC for guidance. I certainly will be doing more woodworking business with CIC in the very near future.
Cutting It Close - Richardson 112 Trucker Hat
Grady G.Verified
The panels were glued well with no visible gaps and sanded smooth with what appears 180 grit sandpaper. I used the 24x24 panel to create a pocket for 19 inch diameter circle. I inserted an epoxy medallion I made of the US Marine Corps logo into the pocket. Looks good
Cherry Panel
Adrian D.Verified
My order was delayed due to the popularity of the September inlay kit and I was very surprised to receive a phone call from Ashley (I think that was her name) informing me of my new shipping date. I can't recall a time where any company that I have ordered from has ever taken the time to inform me of any issue, let alone a shipping delay that was only a few days anyway. The real kicker is that a human made the call, not some prerecorded, pre-packaged cold message.
That means something.
Onc...
September - Complete 🔥Inlay Starter Kit🔥
Dwight F.Verified
CIC workshop has fantastic products from bits to lumber and kits! I am always well pleased when my products arrive from CIC workshop! They are my go to source now!
3/16"x 3/4" Upcut - 1/4" Shank - UC2875
Rick M.Verified
I just received the bit. I have been testing it on some mdf, trying different settings to see which is best for me. Once I have "mastered" it, I will post photos.
I am impressed with how easy it is to set up. It's a lot faster than my router!
1/2’’ x 1/4’’ Point Cutter Roundover 1/4’’ Radius - 1/4 Shank - PC25
Victor R.Verified
I have not cut the file yet. I am having health issues and cannot get to my machine yet. Soon though. I will let you know as soon as I can get to it. I am looking forward to doing that one.
Deer Inlay Digital File
David A.Verified
I’m saving the wood to do something nice on them. My CNC is down right now. I moved from California to Tennessee and my CNC got jacked up so I did a GoFundMe to see if I can raise money to get a new one.
BamX - Bourbon
Jon L.Verified
I got the file so that I could experiment with an inlay. I haven't cut it yet but the instructional video is a big help. I use Carbide Create v6, so need to work out how to use Advanced VC without the "inlay" feature that was introduced in CC v7.
Deer Inlay Digital File
Keith W.Verified
Very nice kit. I really like the size and having all the necessary things is also good.
I think that the size of the wood in this kit would be a good seller by itself like you present 12 x 18 boards.
September - Complete 🔥Inlay Starter Kit🔥
Ed S.Verified
This is my first CNC but I think I started out with the best. I have some friends with machines from different manufacturers but I think the Altmill is superior in almost every comparable metric. I had a few minor issues shortly after starting up my Altmill but the Sienci team was there to help me and able resolve my concerns.
ColorCore HDPE Plastic - Premium Multi-Layer Engravable Sheets
Michael C.Verified
I have a pretty solid collection of thank you cards. My favorite are from mom. My mother passed a year ago on the 5th of October and her 81st birthday would have been the 30th of September, so thanks for the encouragement to both moms
Hard Maple Panel
CIC Workshop ReviewsVisit store