Juan J.
Excellent fit, super fast shipping. I’ve purchased numerous carbon parts for my V and my Z06. Extreme online has always provided extremely high quality carbon products, that fit every time.
Extreme Online Store ReviewsSee store reviews
2009-15 Cadillac CTS | CTS-V Carbon Fiber Mirror Covers
+2Aaron S.
Item arrived sooner than expected and was well packaged. Product was just as described and at a really good price point. In my opinion, it was not a difficult instillation and gives an OEM plus look, but is near flush fitment which is the caveat of buying carbon fiber parts.
2023-Up Acura Integra Extended Rear Spoiler
David G.
Extremely nice piece that fits perfectly. Only thing to note is add an additional piece of 3m tape to center bottom to ensure it sits flat to cluster. Other than that, it's perfect!
Chevrolet Corvette C8 Carbon Fiber Gauge Cluster Cover
Will K.
The bolts are the hardest thing about this install. You will a lot of elbow grease and maybe a wrench that can turn stripped bolts.
But overall, like the sound of this muffler delete.
2014-Up Infiniti Q50 Muffler Delete Axle Back 4.5" Dual Tips Exhaust
+1Jefferson E.
EOS service and order processing is lightning fast. Product was well finished and installed without difficulties for 2 seniors. Although being able to use a home lift like back yard buddy made it easier. The skirts look good if you’re looking for more.
Jeff E.
Chevrolet Corvette C8 3VM Side Skirts
+1Javon C.
Item was paired together with headers from EOS and lined up perfectly came with all bolts and gaskets needed car sounds phenomenal i dont regret my decision at all will most definitely do business with again 5 stars
Corvette C7 3" 6.2L V8 3" Connection Performance X-Pipe
![Customer photo review of Corvette C8 Z06 / E-Ray DRY CARBON FIBER Front Splitter [Z07 Package]](http://images.loox.io/uploads/2026/3/10/x4Y5jTC3_.jpg)
+1#17657 T.
The parts fit perfectly, screw holes lined up, and the necessary hardware was there. The C8 was not the easiest bumper to remove as you have to remove 4 under panels, the wheels, splash guards and fender liners. Take your time, keep the screws and clips organized, and take pictures as needed. Cutting a new fender with the canards slots needs some commitment. Check the template against the canards, use a dremmel, and test fit often.
Love the splitter and canards over the base Z06 splitter. I had...
Corvette C8 Z06 / E-Ray DRY CARBON FIBER Front Splitter [Z07 Package]
+4Rod R.
It was an easy install for me and for most DIYers. You may run into some of the pre drilled hole in the middle area on the side skirts not able to drill through due to metal interference underneath the C7 corvette stingray. I didn’t want to drill through the metal. I pre drilled holes around that area on both side skirts. Other than that everything installed quite easily.
Corvette C7 Stingray Package Rear Spoiler
Paul S.
You guys never disappoint with your products. This was another clear winner. Took about 1 minute to install it and it changes the appearance drastically. You guys are my go to for my c8. Keep it up.
Corvette C8 Radio GPS Navigation Screen Cover
+3Michael C.
Did the install without help on my driveway. Would be better if a template was included for rear spoiler for the drill locations but with a little patients and double measuring it got done!
Chevrolet Corvette C6 Grand Sport / Z06 Full Aero Kit
Thomas G.
It was great. Shipped really fast. Install was smooth. Came with more than enough hardware to install it. And is holding on stronger then all my other lips!! Overall looks great.
2018-21 Subaru WRX / STi VRS Style Front Splitter Lip Ground Effect
David M.
SS-277-V2-ABS - Chevrolet Corvette C8 5VM Side Skirts - Carbon Flash Metallic / Corvette C8 Stingray)
I am extremely pleased with the quality. This set is a major upgrade over the first two I received.
The new mold is outstanding—it no longer has the seams that were present in the older versions. My technician, who installed them, even commented that this set is “head and shoulders above” the last 2 sets I received.
The fitment and finish are of much higher quality as well.
Chevrolet Corvette C8 5VM Side Skirts
+3Ayush P.
This carbon fiber diffuser is a perfect for the BMW M3. The fitment is spot on, with no gaps or modifications needed, and the carbon weave is flawless with a deep, glossy finish. It transforms the rear end, giving the car a more aggressive and premium look, especially in sunlight. Installation was quick and easy, taking about 30 minutes. it’s holding up perfectly. If you want a high-quality diffuser that looks amazing and fits like OEM, this is the one to get. Five stars!
YouTube: AJP STREETS
Y...
BMW G80 M3 G82 G83 M4 Rear Diffuser
Joseph L.
Looks great. Watch the installation video and they will be simple to install. Take about 4 hours. If you are planning on upgrading your rear spoiler, I would recommend doing it at the same time.
Corvette C7 Add On Rear Bumper Diffuser
+1Travis B.
Very impressed with this lip. Fitment is great, didn’t have to modify or open up mounting holes. Used the mounting holes for the under trays to line everything up, then drilled a few holes for the bolts to the bumper. Looks great. Will be getting the side skirts soon 👍👍
2014-20 BMW F80 M3 | F82 M4 M-Performance Front Splitter
![Customer photo review of Corvette C7 Laser LED Side Marker Assemblies [Smoked Lens]](http://images.loox.io/uploads/2025/7/26/5nVOtH-bu.jpg)
+2Steve M.
Side markers are great! I also bought the carbon flash front flares. As shown in pictures the quality of the flares are not the best. The one pic by the light has bad edge drivers only plus installed same as video and the 2 marker points did not line up as I forced the flange in broke both of line up points. Luckily everything was lined up and worked.
I was expecting to buy the carbon flash front lid and sides from extreme but now thinking about buying
Corvette C7 Laser LED Side Marker Assemblies [Smoked Lens]
+2Brian W.
I am very impressed with EOS on multiple levels. Their products are incredible in look, manufacture, and quality!
Their customer service is beyond reproach, they respond very quickly and handle any issues promptly. EOS employees demonstrate professional behavior rarely seen now.
I would recommend them to anyone and will personally continue to purchase their products!
Corvette C7 ZR1 ZTK Conversion Rear Spoiler High Wing Winglet
+1Dustin S.
This c6 carbon extended spoiler was a great fit on the car. It really set the car off would recommend this 10 of 10. I ended up doing the drilling wasn’t horrible, but make sure you measure three times and drill once. Couldn’t speak better about this and the price. 10/10 would buy again.
Corvette C6 ZR1 Extended Rear Trunk Spoiler
+1Greg G.
I am amazed at the look of the Z06 style side skirts, for my Z51 Stingray. I chose to utilize rivets opposed to the hardware that was included. The carbon flash paint on my items match perfectly. I would definitely buy again. I recommend EOS for quality items. Customer service was very helpful regarding my questions. I definitely appreciate Extreme online Store
Chevrolet Corvette C8 Z06 Conversion Side Skirts
Ryan R.
Great company their products have a good finish on them, whether you order glossy or carbon fiber or primed. My splitter showed up cracked in two spots unfortunately. But good quality
Corvette C6 Grand Sport / Z06 Front Splitter Lip | ZR1 Conversion Package
Mitchell B.
My order was sent out very quickly and arrived without any damage. It is installed on my base 2007 C6. It totally changed the look of the car. I installed it by using the drilling method. I am so glad I purchased this brand. The paint was also like OEM quality.
Corvette C6 ZR1 Extended Rear Trunk Spoiler
+2Scott C.
Love the fit and finish! Test fit to final fit was spot on! Totally changes the appearance of the stance on the Q60! I upgraded the 3M tape to a stronger/wider quality to be safe, but the self tapping screws supplied, worked well. No instructions, and nothing on the website either? It’s a very easy install, but instructions, or a QR code to install, would be helpful. Regardless, absolutely love this addition to my 2018 Red Sport!
2017-Up Infiniti Q60 Carbon Fiber Front Splitter Ground Effect
+2Bradley M.
I purchased the Stage 2 Carbon Fiber Splitter w/ winglets as well as Carbon Fiber front fender flares to replace the ABS plastic OE parts. Following the videos, I was stoked at how easily all three were to install. I was able to install both flares in about 30 minutes total. The splitter took a bit longer but I was extremely careful to get all the mounting tape placed correctly. I am extremely pleased with how great they look on my Z06 and how well they fit with the factory mounting location...
Chevrolet Corvette C7 Stage 2 Front Splitter
+1Nick S.
I busted my splitter and needed a replacement. Thanks to EOS and their quick shipping, I was able to grab a new one and have it installed for a show less than 10 days after it happened. These products are a great value proposition and are my go-to for my car. Fit was perfect.
Chevrolet Corvette C7 Stage 2 Front Splitter Lip
+4Timo H.
I come from Germany and have seen the shop on Instagram and was enthusiastic about the variety of tuning parts and have ordered spoilers and I am really thrilled it matches 100% with the original spoiler holes and also the camera fits perfectly will order other parts in the future!
Camaro ZL1 1LE Rear Trunk Spoiler W/ Rear Spoiler Camera Option
+1Tai B.
Fast shipping with nice packaging. Carbon fiber looks great with excellent fitment. Comes with 3m double sided tape and screws. Predrilled holes that line up with oem expansion push pin. Gives the Supra a very nice oem+ look!
2020-Up Toyota Supra A90 Artisan Spirit Rear Apron Lip
+1Michael M.
This wing is nicer than I expected. It changed the whole look of my car. It looks very sleek and does not look cheap at all. I am very happy with it. I already had a Z 51 wing on it so there was no custom drilling needed. Everything fit on that perfectly.
Chevrolet Corvette C8 5VM Extended Rear Spoiler
Craig L.
While it was on backorder for a couple months, it was worth the wait. The carbon flash and shape is a great match against the existing rear features of the Corvette. I heard others used extra 3M double sided tape for there installation so I did the same, adding a bit to the corners. I love the new look!
Chevrolet Corvette C8 License Plate Backing
Daniel V.
Love it! The fit and finish is perfect. I ordered the front splitter and side skirts as well. The pricing is lower than others and the quality is better, this rarely happens in the world of business. I have ordered the same pieces for a C6 and C8 Corvette from another well known company in the past and these pieces exceeded their quality and at a lower price. I will be ordering other parts in the future
Corvette C7 Stage 3 Rear Spoiler W/ Wickerbill Extension
+3Bo N.
This 1LE spoiler is really good quality coming from aftermarket parts. Price was really good compared to other vendors in the $500+ range. Install was simple. I recommend using some type of goo-gone or a type of prosolvent with fishing line to remove the factory zl1 spoiler.
Camaro Zl1 1LE Conversion Rear Trunk Spoiler High Wing
Gabriel N.
Said there was a wait for a few weeks, but the part came in only a few days! Beautiful carbon fiber spoiler, very sturdy piece and stunning to look at! The mounts are very well made and offer quite a lot of structural strength to the rear of the car.
The trimming isn't too hard for a Z51 and the lower spoiler covers up the factory rear bumper holes with quite a nice (and functional) touch and added flare! The pieces fkr the mounting bracket are very well made and easy to install!
Beautiful p...
Corvette C8 Z06 Conversion Rear High Wing
+1John C.
The installation was very easy. For both the front and the back. Unfortunately, when installing one of the ones in the front, I was not careful to ensure the holes were aligned and when applying pressure to insert, one of the inserts broke off, so I installed it with one missing, but so far it looks fine.
Corvette C7 Extended Front & Rear Splash Guards
Jason E.
10/10. Material was high grade and didn't feel cheap, fitment was excellent and it came in a timely manner. Will definitely be buying from here more often. If you have a base model or Z51 like me, this is a fantastic swap from the ugly original that looks like braces.
Corvette C7 Front Bumper Grill
![Customer photo review of Corvette C8 Stingray Front Splitter [Z06 / Z07 Conversion Package]](http://images.loox.io/uploads/2025/9/27/FxNjHrDcn.jpg)
Brian C.
I couldn’t be happier with my purchase from Extreme Online Store! I ordered the Corvette C8 Stingray Front Splitter Z06 / Z07 Conversion Package, and the quality is outstanding. The fitment was spot on right out of the box, and the carbon fiber finish looks amazing in person—pictures don’t even do it justice.
Shipping was quick, everything was packaged securely, and the customer service team was responsive and helpful throughout the process. The splitter completely transformed the front end of ...
Corvette C8 Stingray Front Splitter [Z06 / Z07 Conversion Package]
+1Anthony G.
Love the quality of the product installed it myself start to finish 2.5 hours that time is including putting under glow lights back on an adding led rear marker lights. All in all it was a easy install
Corvette C7 Stage 3 Rear Spoiler W/ Wickerbill Extension
David C.
The carbon fiber rear diffuser for my C7 Corvette, was one of the simplest add-ons that I have ever put on a car. I removed the stock diffuser and the new one popped right back into place with no modification or additional screws and it looks great on the car.
Corvette C7 GM Factory Package Carbon Fiber Rear Bumper Diffuser
William B.
Awesome product not only the product but the excellent customer service I got from the company . They listen to you and take care of everything common issue . Thank you guys and you will expect more from me buying for your product on my corvette
Corvette C7 Extended Front & Rear Splash Guards
![Customer photo review of Corvette C8 Stingray Front Splitter [C7 ZR1 Stage 3 Package]](http://images.loox.io/uploads/2025/9/25/K3NdaCOtg.jpg)
Terry L.
Had a friend with a lift, making it easier to access the screws to remove the factory plastic spoiler. Holes on new splitter perfectly lined up with factory holes and reused the OEM screws. Did not need to use the supplied phillips sheet metal screws. Not a fan of phillips head hardware, prefer hex heads anyway.
Corvette C8 Stingray Front Splitter [C7 ZR1 Stage 3 Package]
David S.
The install was easy! I watched that video at the bottom of the page. It looks more aggressive to me now so I’m happy! I’ll be grabbing more parts soon! Thanks!!
Corvette C8 Rear Bumper Add-On Diffuser Lip
+2Evyn S.
I was really dreading the install because I knew you had to drill into the body panels. Once you get over it you don’t regret it though, makes the car look great. I have not fully speed tested it yet but it seems to do well over the “speed limit” in Mexico
Corvette C6 Grand Sport / Z06 Front Splitter Lip & Side Skirts Rocker Panels
Extreme Online Store ReviewsVisit store