Extreme Online Store ReviewsSee store reviews

Item arrived on time and very well packaged. To my surprise the covers came with heat shielding tape already applied on the undersides. It’s winter time and I have not drove the car with them installed. Time will tell how the carbon fiber holds up to the engine bay heat. I hope it doesn’t turn brown.

I haven't put it on the car yet. I put it together today. The holes could be just a little larger, had a little problem getting the screws through the holes. It took some work but got it done. It looks great now to install.

Perfect size spoiler for the base C6. A ZR1 extended would have been too big for the narrow body car. I didn't want to drill holes in my Vette and this works perfectly in that regard because there are 4 spots in the center where it bolts into the existing holes for the factory spoiler and brake light. I taped the outer part on each end down with 3M auto trim tape and it stays put. The option is there however if one wants to bolt the whole spoiler on. The hardware is included.

Fitment of the front splitter was a little tricky to get flush, but I got it pretty good eventually. No issues with the side skirts at all. Very happy with how it turned out!

Delivery was just as fast as Amazon. Total project 20 minutes fits like a glove. A little 1000 grit sandpaper and ready to get it wrapped!! Great product!! Would highly recommend. Delivery speed was my highlight. 4 days from order!! Thank you!

Great product quality and fit, I have ordered several of your products for my c6 and c8. The product quality is superb and all of them fit like OEM or better, people compliment my car continuously and all me where I get my custom built parts. Thank you for the continued support and great products both interior and exterior.

Parts came quick in perfect condition and was a simple install took only about 1.5 hr to do both side skirts and front splitter. Car looks 100% better than the stick look def recommend

Super easy to install. I don’t have a jack but would probably be easier to do if you do. I just took my bumper off instead to install. All you have to do is line it up, drill the holes, and put the screws in. Much easier than my other sti lip I had on. It’s wider and sticks out more, matches my side skirts better!

Fit is great! Install was super easy and it came with the right tape! I did get some before I installed it but didn’t realize it would come with it. I love the look and it looks like it was meant to be there! 10/10. Great aggressive look and so much better than that dinky stock spoiler.

Shipping / packaging was good and strong. I think there should be a note saying that a reinforcement may be needed for the use of the zr1 / zo6 front splitter alterations.

Looks great and finally gave me the look I was wanting for it! Have had it up to 130 so far and hasn’t budged. Definitely quality add ons for a fair price

Love the look of the Splitter and side Skirts on my C8! Quality and fit is great. The ordering process online was easy and the delivery was fast. Would recommend this product to other buyers.

I started off with a white SRT stock spoiler. Now I have the Gloss Black Redeye Spoiler w/ Wickerbill & I love it. It gave my RT a super aggressive look that kills. Thanks for having a great product with a great price. Plus, I'm digging my new camera view too.

Absolutely committed to customer satisfaction. Outstanding customer support. I will (and already have) purchase many more items from this seller. Quality and fitment are spot on. Very happy with these folks. Thank you!

Fast shipping, very well packaged, fit perfectly all holes lined up to factory anchors, came with high speed tape. Only issue was the screws that came with it, were too large for my stock anchors, so I used my factory screws.

I was very happy with the speed of the shipping and the quality of the product. the Carben flash color looks good and matches the OEM color on your front grill, front and side vents, and bumper.

The shipping was fast the figment was great the rock guards stuck out perfectly to match the wide tires I have on my car to not get rock chips or dirt and debris up the side of the car. Some friends said they will definantly be picking some up for there Camaro’s

Absolutely love it if you plan on getting on or are thinking about it just do it your only slowing your self down from how amazing this actually looks on the car! 🫡🫡

The product looks great, it felt like it was made with high quality materials, and it gave the car a profound mean attitude, even though it is hard to appreciate from the picture.

It’s amazing and very easy to put on if you know how, I do recommend having a few friends to help. But overall it sounds amazing, very loud, and for the price, sounds exactly like a top end brand 🫡

Great quality! shipping was fast and extra detail to the packaging was taken to make sure it didn’t get damaged,I used different hardware as the ones it comes with I didn’t like

Just what I was looking for! My car was in an accident 6 months ago and my original grill got damaged. I figured I would finally get a gloss black grill and I love it. The shipping was super quick.

I researched what would be the best looking and install for my expectations, and this product and seller was in the price range and had a great reputation. All needed hardware was included.

Had a local shop install this on my 2014 QX70. Minor modifications needed, but sounds awesome! Once in low RPMs like cruising on the highway not much drone if at all. It’s exactly what I was looking for!

Love the look of the stage II splitter. Very easy to install with a second person to help. Fits great. Definitely looks better than the basic dull gray splitter that Chevrolet installed on the car.

They look amazing! So much better than the factory dull textured plastic flares that were on the car. Love the fact that they match the carbon flash color of the other parts of the car. Install was a little hard and not because of these flares. The design from Chevrolet requires that the flare has to slide slightly in between the inner wheel housing and the fender above the wheel. Definitely worth the effort!

Great Product and great customer service! Don’t use the supplied self tappers for the 3rd brake light, use the posts from the factory 3rd brake light. You will need to utilize this to pull the front of the spoiler down otherwise you’ll have a large gap in the front.

Packaged well and fast shipping for the size of the package. Installed and noticed my factory rockers were pushed in slightly on the back half closest to the rear tire. Nothing a few extra rivets couldn't fix. I used aluminum rivets over the extremely long screws supplied and 3m double sided tape. Front lip is EOS zl1 style as well but bought local from someone that ended up not using it. Very nice side skirts, good finish. Wing is street fighter LA.

It was a super easy install I had the smaller factory spoiler took it off no problems and got the new one installed. Only took 3 hours no drilling for me.

Amazing quality! Really love the OEM+ look it adds to the car. Gloss black was perfect for me. Would definitely purchase again. Shipping was super fast and splitter was well packed

The first thing I noticed was how well the skirts were packaged. Before installing them, I applied a ceramic coating to preserve them over time. They fit perfectly onto the car, requiring no further modification. I appreciated the inclusion of pre-drilled holes on the skirts, making installation straightforward. Now, all I need is a carbon fiber front lip to complete the entire carbon look I’m aiming for.

Fiberglass parts were first class. Mounting hardware leaves a lot to be desired. The supplied screws are of poor quality and not stainless. Nuts and bolts to attach the 2 parts together were missing altogether. Fortunately I had all necessary stainless hardware on hand. This will make installation more difficult for an individual not as experienced as me as the enclosed instructions were very minimal. But overall, I’m very pleased.

Very please with the quality and the application of the front splitter /winglets , everything lined up perfectly and it brings out the aggressive look to the front of the Car , I would highly recommend your product to anyone looking to upgrade their Corvette . Thanks , Ken

Unfortunately, this was the 2nd EOS splitter I installed. The first one was damaged when I hit a chunk of wood on the interstate. At least the price is VERY reasonable, and the quality and fitment of the EOS components are spot on!

These fender flares just completely elevate the look of car compared to the factory dull plastic ones I had before, just making it look more aggressive. Unfortunately, one of them arrived slightly scratched, but I think I'll be able to buff it out. Otherwise, great product!

Slightly off on one but that could be my fault. Good quality product. Doubled sided tape allows little error. Pulling the backing off of the tape was a serious challenge. Other than that, great addition.

Looks great, fits like a glove! The only issue we had, was that it did not come with any 3M double sided tape; it should have come with a roll of double-sided tape, or better yet have the tape already installed and prepositioned on the product.

AWESOME carbon fiber lip for C6 corvette. Looks and fits perfect. Installation is awkward if you want to drill and screw due to limited space inside bumper over tail lights. Very hard to get hands in there w ratchet. I tried lots of screw options but so hard to get started blindly. I ended up w 2 screws in the stock location and double sided tape rest of lip. Holding great. Really improves look of the already awesome C6

Fitment is awesome. Wish the studs coming out of the spoiler that go into the holes that you still were a bit longer. Was afraid of either pulling them out of the spoiler or breaking them. But it's on there and working. Beautiful piece. Install was really easy. No instructions to install but YouTube videos are out there. It's not rocket science. I get a lot of compliments on it.

Excellent experience product was perfect. Installed very well. I feel the fasteners could’ve been a little better though. I ended up going to the hardware store and buying black head flush mount screws.