Crafted Elements ReviewsSee store reviews

After my recent purchase of your full size router slab flattener, 96” x 40” set up. I followed the video instructions to set up the equipment. It was easy with no drama or complications. A couple of issues that were encountered… Alignment of the 48” rails took some adjustment to enable a smooth transition across the rails. I left the rubber bearing dust guards in place. After making a few rail alignment adjustments and running the system it is very smooth. Love it. After the first run I...

Your router base plate and swappable palm trim router plate are great examples of smart design. Adding to your work, I was able to build a router table extension on my Dewalt (DWE7485). For less than $100, including the cost of your base plate and swappable trim router plate, I've got a router table with a fence. This has reduced my set up time by about 80% for flush trimming, roundover, and chamfer routing. It's simple to remove my palm router from the base plate and the two handles are not...

Used it to groove an 18”x 14” cutting board. Worked as advertised and saved a lot of measuring and set-up. I used a trim router with a 5-1/2” round baseplate and a 1/2” cove bit. One thing I would recommend is to make your spacers long enough to touch each other. Mine were short which reduced the support for the router at the corners. That allows the base plate to tip into the spaces if you’re not careful to keep it absolutely flat. I did get one slight “tip” before I realized what caused it, a...