Motion Raceworks ReviewsSee store reviews

This adapter also works for the FAST LSXR intake manifold but you'll have to use the Torx 20 bolt included with the intake. The o-ring seals really tight with the required drilled out 15/32 hole.

Kept blowing up alternators spinning the motor over 7k. Powermaster recommended their oversized pulley to fix the issue, but nobody had one in stock. Then I found this BEAUTIFUL piece which solved my problem. Also didn’t affect charging at idle at all (although my motor idles around 1k), the alternator still puts out 14.2 volts on average. Best purchase I’ve made in a long time, thanks again!

I liked the look of it. I had to cut the end off to fit on my Holley Sniper Duel Plenum intake to work. Maybe some more information on what intakes it will and will not work on. But in reality a little fabrication is the name of the game.

This bracket fits great and gives a great look to this setup! Fits like a glove and functioned perfectly. Helped me avoid welding on a very nice intake lid (which is a 417 lid for a high ram anyone wondering about fitment)

This is such a handy piece. I was able to pick up my trans pressure, my nitrous pressure (which is directly above), my trans temp, and my oil temp. It kept everything super clean and hidden. You can’t ask for much more than that. I’m not sure if this was its general designed purpose, but I’m loving it.

Nothing to say that hasn't already been said. The steering wheel is top notch and at a great price point. The Customer Service is even better, great job Motion Staff!

Material and craftsmanship is second to none! Don't bother with cheap Ebay junk, cause I did and after many hours of frustration I finally just ponied up and bought this. Highly recommend this as the adjustability is awesome! This was my first purchase from motion and because of the quality I will continue to purchase products from them.

Great piece. I like the idea of the AN fitting should the drain hose need removal. I find this much easier than removing the flange bolts from the turbo itself in the tight space available on my car.

Looking for a great coil on plug mounting solution? Look no further. It took less than an hour to mount the coils on my valve covers. The way the coils stack reduces the length of the coil pack for a clean look that has ample room for the breathers. Super affordable and made in the USA!

Installation was easy and enjoyable. There were 4 bolts and nuts out of the whole kit that stripped out within 2 turns. ( which is not bad ) In other kits there are a lot more. I would recommend this wing to everyone. Way easier than any other wing I’ve put together.

While updating the car I didn't want the same old boring parts as my buddy's have so I ordered the Cleetus billet handle and do not regret it. When I'm yeetin and skeetin I have the confidence Bald Eagles are going to fly out of my chute and stop me quick once I hit that lever. Hell Yeah Brother!

I switch from a mustang 5.0 style throttle body to an LS dbw setup on my Honda crx, this adapter made the switch super easy. It would be nice if both sides of the flange were O-ring sealed but it’s a great piece and works great!

This is by far the most comfortable and best fitting hat I have ever ordered....and that is saying a lot as I have a big and weird shaped head!

Used the DIY column in my 96 impala ss that is being set up for street/strip use. Mocked the g-body style mounting and welded up some brackets to make it a simple bolt in. Topped it off with a billet directional handle 🤙🏻

Installed on a 2002 f-body , I had to do some minor modifications mainly because I’m using the dart ls next block and had turbo hot parts that I had to work around. I had to order a shorter belt but I would say since I was able to make it work in my tight quarters that it should work good on most applications.

So I bought this hat simply to replace an old hat I had. Little did I know that as soon as I put it on my head, a bald eagle pulled up in front of my house in an IROC Camaro with a hog ass cam ripping the nastiest burnouts to the Freebird guitar solo. Oh and I got a free sticker too. If you love freedom and want to instantly be cooler than anyone else around you, buy this hat.

Love these brackets and the valve covers they attach too. The adjustability is nice as well, and allowed me to keep the coil farther away from the heat of the turbo.

Awesome job Motion! Love the look and the feel. I Highly recommend for you street and strip OBS guys out there! Install was very straight forward if you’re familiar with making brake lines!

Been anxiously waiting for this shifter to come out. This is just mock up and I’m just thrilled with how good it looks and feels! Dalton you were right again! This thing just looks sick in my car! As usual, my customer service is just as outstanding as their parts!

I love the quality of everything I buy from Motion and also love to support built in the USA as much as their crew and partners! I’m hopeful that some day, more companies will wake up and create more products on our soil. Cam

The ability to increase the breather hose size help with reducing engine leaks and the dip stick blowing out under boost. The motion raceworks breathers almost eliminated all oil from the top end. Thanks, Craig Davis www.davisracingteam.com

The ability to increase the breather hose size help with reducing engine leaks and the dip stick blowing out under boost. The motion raceworks breathers almost eliminated all oil from the top end. Thanks, Craig Davis www.davisracingteam.com

Today I installed the valve cover and breather in my 2017 chevy Silverado 5.3 l83 engine very happy with the value cover installation and the only thing nowhere to mount oil dip stick tube and passenger side nowhere to mount heater hose bracket that the only thing very easy to install and I crank case breather also

I’ve been wanting these valve covers for a long time. When I seen the blems come up for sale, I showed my wife. She got them for me and they’re so much nicer than expected! Customer service is so polite and really appreciate their customers. I’ll be a long time customer for sure! They earned it!

So well made for such a simple, easily overlooked, very critical piece of the puzzle. Easy to install, adjust, cut to fit and very easy to remove once assembled. My intake is flipped around and not the easiest to remove.

Showed up ups ground fairly quick. Found a good location for it to be mounted. Quality seems nice. I’m a machinist so it’s nice seeing ORB ports machined correctly !! Nice finishing touch on my breather system! Thanks !

I’ve never done a chute install before so this was perfect learning experience. I am very glad I had skinny arms to place the brackets Inside the bumper though 🤣. The cable was easy to run and the entire kit was easy to install. And of course the customer service is ridiculously awesome!

Before we put these on my car would nearly set it on the bumper every pass and slam down hard. These allow for a ton of adjustment and work awesome.

Was supposed to be on a budget but these amazing products Motion has threw that budget out the window. Looks amazing and the quality is hands down the best! Had another TB but hood clearance was a issue and wouldn’t be able to use a t bolt clamp for the silicone coupler also the return spring was kinda soft. This icon unit solved all that.

Don’t even think twice. These things look amazing to me! I can’t find what was wrong with them I’m afraid it they keep getting good reviews for something that they claim is blemished they are going to charge more or lower their standards and won’t be able to get them for this price. Will definitely buy again on my next project. Keep up the awesome work and parts!

With Holley low ram fits great under hood with no trimming, on a 99-06 Silverado. Iced down even in hot Texas weather won’t se more than 80deg at end of run. Great product for sure!

My awesome wife brought this kit for me as a Christmas present. Can not wait to install on your shifter that I got few months ago that I also love.

Fits gen 2 Coyote manifold perfect! since there’s a gap in the runner gen1/gen3 it makes the cable turn right off the bracket but would most likely still work!

Recently install this on my F250 cummins. I used the stock timing cover vent and added one of the motion raceworks valve cover vents to the factory valve cover. The install is easy with the template and provides a clean look. Looking forward to an update in 5k miles.

Installed on vs racing turbo and had to grind of some of the edge to fit. I guess I thought it would go perpendicular with the turbo but this turbo is different. Vs racing billet gt42 80mm t4. More my fault than motion. The piece is high quality just wanted to show not all flanges may work.

This fall hoodie fits like a warm hug. Motion uses canine labor to pack and ship their goods and my Maeby definitely approves. I think she’s filling out an application as I write this review.

A few weeks ago at the gas pump, I could not remove the plastic standard cap on my cell. Needless to say I ordered this that night. The fit and finish is second to none. Feels so solid, so well made, just like every other Motion part, expect nothing less.

I bought this knowing it wouldn’t fit. So to be clear nothing wrong with the part itself. It’s very nice. I have an Ididit column in my civic. It measures 1.75” dia. Unfortunately they don’t have the (tube clamp) mount in that size. So I bought a correct size tube clamp drilled and tapped it to fit their mount on it. It was nice that the mount bolted together and has adjustability for me to be able to still utilize the rest of the mount.

Loving the new MPI steering wheel from you guys! Couldn't of purchased it from a better company! Looking forward to buying more go fast parts from you guys in the future.

It easily holds a complete change of clothes, towel, deodorant, a couple M-12 5ah batteries, a multimeter, knife sharpener, five cans of Skoal Wintergreen fine cut and a bag of Mingua Brothers hot Cajun beef jerky. Ahh…. just what a chief engineer needs…