Motion Raceworks Reviews

Motion Raceworks ReviewsSee store reviews

Visit store
Customer photo review of Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)+2
Brian P.
Great experience. Website worked perfectly and it shipped fast. I also called for advice and your support was great. Thanks! Side note: I built an Ultima RS and the catch can they supplied doesn't work. Several builders had oil dripping from the breather. I swapped my PCV and catch can for AN10 + your cat can and it works great. I already told Ultima they need to switch to you guys. Many of us build our cars with LT5's and LT4's, as well as a ton of LS's. They need to upgrade what they sell cus...
Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)
Customer photo review of LS Adjustable Timing Pointer Kit (Truck / 5th Gen Camaro Spacing) 10-11004
David M.
I built this 40/ford it has an LS motor but it’s meant to look like a Mel motor Lincoln I have a single distributor got most of the brackets from Robert Yates but I needed a new timing marker you guys help me out save me a lot of time it has a fuel injected Holley throttlebody so I needed to find top dead center and with all the pulleys I couldn’t see the timing mark but with your extended timing marker it really work good thanks again
LS Adjustable Timing Pointer Kit (Truck / 5th Gen Camaro Spacing) 10-11004
Customer photo review of Motion Raceworks Edition MPI Race Steering Wheel - DRG-R513
Kristin M.
Such a bad photo to show you guys! But I surprised my fiancé with this steering wheel for his s10 for his birthday. He’s been wanting it forever and I finally just bought it for him! He absolutely loves it.
Motion Raceworks Edition MPI Race Steering Wheel - DRG-R513
Customer photo review of Hotrod OBS Truck BoxerFink Shirt+1
Jesse M.
I was so excited when I got it and the art brought me back to my days on September 10 we celebrated my 42 years anniversary. My son took the whole family out for dinner and I used the shirt there were two couples that gave me a thumbs up. The other one I bought I gave to my grandson that day and it brought him a big smile hopefully you put out some more like these
Hotrod OBS Truck BoxerFink Shirt
Customer photo review of Motion Raceworks ICON 92mm /95mm Interchangeable Throttle Body 10-130
Kelly E.
Low profile design allowed it to clear my hood. Blade shuts great, and idles perfectly. I would recommend getting the icon throttle cable to go with it, they fit together nicely.
Motion Raceworks ICON 92mm /95mm Interchangeable Throttle Body 10-130
Customer photo review of Fragola -10 AN Female To Female Swivel 496110-BL
Andrew B.
Using a double fuel pump setup. so I'm using these between the MP-7009 and my Magnafuel pump as my primary pump and a bosch 044 as my surge tank pump
Fragola -10 AN Female To Female Swivel 496110-BL
Customer photo review of TBM Brakes Line Lock 52-1022
Jared B.
Haven't got a chance to wire it and use it... but I feel this is the best looking line lock on the market. Hopefully it's as durable as it looks.
TBM Brakes Line Lock 52-1022
Customer photo review of Cleetus Edition Limited Edition 13" Off-Road Wheel MPI-GT-13-CLT
Ross Glave G.
Great steering wheel, I took it right out to Johnson Valley to pre run for my 10th King of the Hammers Race. No Flex in the wheel, the hardware stayed nice and tight after doing lots of whoops and rock crawling. Hell Yeah Brother!
Cleetus Edition Limited Edition 13" Off-Road Wheel MPI-GT-13-CLT
Customer photo review of Motion GM/Ford Bolt-On SFI Quick Release Hub 5/6 Bolt Pattern 15-270
Dustin S.
Bad to the bone just had to order snap on snap on snap on gm steering wheel puller kit thought I had one but the one I had wouldn't work 😝!!!
Motion GM/Ford Bolt-On SFI Quick Release Hub 5/6 Bolt Pattern 15-270
Customer photo review of OBS Big Blocks & Burnouts Shirt
Robert E.
So cool and proud to show it recently bought a new Chevy pick up and it’s blue. It would match the shop truck so well have been praying to increase my chances of winning. just waiting on an email to confirm that I have won God is good
OBS Big Blocks & Burnouts Shirt
Customer photo review of Sam's Spray Wax Kit w/ Microfiber Towel
Joshua B.
You guys absolutely knocked it outta the park! Best aftermarket order and packaging I’ve ever got. I’ll definitely be ordering more for my foxbody I’m putting together! Hope to see you guys at World Cup finals!
Sam’s Spray Wax Kit w/ Microfiber Towel
Customer photo review of Motion Establishment Shirt
Jesse M.
I gave this one also too to my grandson when I gave to him he gave me a big smile because he has auto mechanics shop. I also gave him one of the obsdragster It was one of the best things I could have ever gave him for his high school years
Motion Establishment Shirt
Customer photo review of High Flow Wastegate Merge for 60/66mm Wastegate and 3" Tubing / 90° Bend 21-13002
Mike F.
As a beginner at tig welding, I’ve had some troubles so far on my turbo ls project hot side. This merge fit on the 90 with a few small gaps but was by far the easiest piece to weld. I’ve got some ugly welds so far on my hot side but this thing almost looks like I know what I’m doing.
High Flow Wastegate Merge for 60/66mm Wastegate and 3" Tubing / 90° Bend 21-13002
Customer photo review of Motion Raceworks Parachute Cable Holder 14-00007
Peter Y.
This console mount cable bracket mounts great on factory T-Top ( tech-tip Tuesday!). The Bracket contours the T -Top in 4th Gen F-Body like it was designed for it (use rivnuts).
Motion Raceworks Parachute Cable Holder 14-00007
Customer photo review of Holley EFI Terminator X Max ECU Roll Bar Mount 18-10012
Ken C.
What a Master peace it swivels around to fit like a glove looks great . and the best part MADE in USA. Keep up the great work. Thanks AKA- Pro Street Hustler
Holley EFI Terminator X Max ECU Roll Bar Mount 18-10012
Customer photo review of Motion Raceworks 2.500" 16 Tooth High Def Driveshaft Speed Wheel (Ford 8.8) Sensor Included
Jason B.
The unit fits and works. Have not tested yet at the track, but that is coming up in the next weekend. I wish the mounting bracket was designed a little better and had a second hole that lines up with the holes already there on the 8.8 housing just to make sure the bracket does not come loose because vibration happens. Thank You
Motion Raceworks 2.500" 16 Tooth High Def Driveshaft Speed Wheel (Ford 8.8) Sensor Included
Customer photo review of Motion Raceworks Parachute Medium Duty
Jason B.
Easy 1 hour installation. The video tutorial made the bumper cutting a breeze using the toilet roll trick. I have been very happy with every purchase I’ve made. Ps. I’d also be happy to be a test mule for future fox parts :) -Jason Brunelle
Motion Raceworks Parachute Medium Duty
Customer photo review of Motion Raceworks 48" LS Throttle Cable w/ Pedal Clevis Attachment 18-151+3
Dan R.
By far the best throttle cable I have ever used! The ends thread on easily after cutting to length, and the bar on the end fits great on the Holley throttle body.
Motion Raceworks 48" LS Throttle Cable w/ Pedal Clevis Attachment 18-151
Customer photo review of Motion Raceworks Billet SBF Valve Covers (Black Anodized) 38-110
Bill A.
Fantastic workmanship and design. They are shorter than my previous Moroso ones and provide more clearance in areas I didn't even realize were tight. They clear my rail rockers with room to spare and for some reason make the engine quieter, must be the awesomeness! I really like the baffling system and think it will reduce blowby on my boosted setup. The filler cap is a great idea but thick oil won't drain quick enough through it with a funnel so I won't be using it anymore as it spills out o...
Motion Raceworks Billet SBF Valve Covers (Black Anodized) 38-110
Customer photo review of Motion Raceworks 98-02 Camaro Dzus Hood Side Rails (Black Anodized) 30-110
Alan M.
Not quite what they were meant for, but they work very well to mount my glastek hatch! Minor trimming of one ear on each side and a little massaging and they are good to go
Motion Raceworks 98-02 Camaro Dzus Hood Side Rails (Black Anodized) 30-110
Customer photo review of Motion GM/Ford Bolt-On SFI Steering Quick Release Hub 5/6 Bolt Pattern 15-270+1
Shawn M.
Couldn’t be happier. Fit and finish 10 of 10. Now if I could donate my Colorado for Science and get you guys to offer a TBM brake kit, life would in be great 👌 Christmas wishlist for Sick Week 😂
Motion GM/Ford Bolt-On SFI Steering Quick Release Hub 5/6 Bolt Pattern 15-270
Customer photo review of Motion Raceworks 5.0 Coyote Engine Diaper, NHRA & IHRA Approved (For Motor Mounts, w/Cutouts)+1
Aaron H.
Fits great. I just switched around a few buckles to different corners. The only thing that would be a nice addition would be a sewn in reinforced hole for a turbo drain on the lh side, as most coyotes going fast enough to need a diaper are probably turbo powered.
Motion Raceworks 5.0 Coyote Engine Diaper, NHRA & IHRA Approved (For Motor Mounts, w/Cutouts)
Customer photo review of Motion Establishment Shirt
Nate P.
You want the most comfortable shirt ever we’ll look no farther, this $Hit is so damn nice and breathable I love how the sleeves are kinda tight on the arms and not all lose
Motion Establishment Shirt
Customer photo review of 3/8" NPT RIFE Standard IAT Air Temperature Sensor GM Connector -10 to 335°F (52-1243)
Scott K.
Photo is of failed GM IAT sensor that caused a litany of idle and driveability issues. Installed new Rife unit, scaled it and all is good. Super fast data supplied to my HP Tuners scanner. Love it and will be back for future sensor business.
3/8" NPT RIFE Standard IAT Air Temperature Sensor GM Connector -10 to 335°F (52-1243)
Customer photo review of Motion Raceworks Black Anodized 2.5lb CO2 Bottle Bracket (Bottle Not Included) 25-10007
Steve J.
CO2 is a tight fit for a car with a backseat. This bracket was super simple and took care of a mounting problem in minutes. Thanks for a great solution.
Motion Raceworks Black Anodized 2.5lb CO2 Bottle Bracket (Bottle Not Included) 25-10007
Customer photo review of Holley 12.3" 553-111 Touchscreen Adjustable Dash Mount w/ Billet Clamp 15-01017+1
Brian B.
Couldn’t find what I wanted , so I called in and the sales people were more than helpful. Even though I had to drill and tap some holes to fit the 12.3” screen to a 1.75” steering column they had what I needed to get the job done , thanks guys…
Holley 12.3" 553-111 Touchscreen Adjustable Dash Mount w/ Billet Clamp 15-01017
Customer photo review of Motion Genuine Parts Sticker 4"x4"
Larry T.
just wanted to enter the truck contest so sticker looks good like to win the truck had to sell my dragster motorhome and trailer in a divorce built most of the dragster myself went 8.76 best ET with a big block chevy 402 cost to start over is just to much money so I keep trying to win a new hot rod
Motion Genuine Parts Sticker 4"x4"
Customer photo review of Motion Raceworks Billet SBF Valve Covers (Black Anodized) 38-110BLK
Peter P.
Great valve covers really like how they turned out. Made installing a breather system really easy. They also work with my Holley Systemax intake without using a spacer to clear the valve covers. It has about a 1/4 inch of clearance.
Motion Raceworks Billet SBF Valve Covers (Black Anodized) 38-110BLK
Customer photo review of Motion Raceworks ICON 102mm / 105mm Interchangeable Throttle Body 10-140
Jason B.
The short mounting thickness of the 102mm throttle body made the tight fit of a Hi-Ram on a foxbody possible. This is the last throttle body I will ever have to buy!
Motion Raceworks ICON 102mm / 105mm Interchangeable Throttle Body 10-140
Customer photo review of Motion Raceworks Billet Aftermarket Turn Signal Switch 15-140
Rambo J.
Earn that extra bass In your voice when you buy this for your build. This piece is beautifully machined aluminum paired with tight tolerances & crisp throw of the switch. You’ll confidentially (with good reason & newfound bass) tell the wife how much you ACTUAllY paid for it while never breaking eye contact.
Motion Raceworks Billet Aftermarket Turn Signal Switch 15-140
Customer photo review of BLEM Motion Raceworks Top Loader Billet Oil Catch Can ( Dual 10 AN Port ) Black Anodized
Rambo J.
“bUt iT’s mORe mOnEY!” The fit & finish is on point & It’s made in America. 🇺🇸 Do yourself the favor of putting this into your cart & buying it when you can while deleting the Chinese-made garbage you have in your Amazon cart. Plus, there’s the bonus of your family starting to respect you again.
BLEM Motion Raceworks Top Loader Billet Oil Catch Can ( Dual 10 AN Port ) Black Anodized
Customer photo review of Warspeed V2 Driver Side Alternator Only Bracket Kit
Carlos S.
THE BASE IS AN EXCELLENT PIECE, VERY GOOD FINISH AND PRESENTATION, UNFORTUNATELY IT DOES NOT FIT A 2010 CAMARO SS 6.2L LS3 THE ALTERNATOR HOLES ARE MORE SEPARATE AS SEEN IN THE PHOTO
Warspeed V2 Driver Side Alternator Only Bracket Kit
Customer photo review of ICON 102/105mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection
Andy R.
Drove it a few miles waiting on a tune at the moment! I have to verify the throttle opens all the way when gas pedal is to the floor! Had to drill out cruise control hook up on throttle lever otherwise working good I think!
ICON 102/105mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection
Customer photo review of LS 3" OD Billet Overdrive Alternator Pulley 6 Rib 10-10042
Nathan D.
This billet aluminum pulley is a show piece! On top of that, my alternator will never spin faster than 18,000 rpm. Installation was fairly straight forward but will require a long T-50 3/8” socket drive to hold the shaft and some sort of pass-through 24mm socket. I used a Milwaukee 24mm 1/2” drive socket with four flat sides to loosen the alternator pulley nut. Make sure you use the shims to get the alignment spot on and torque the nut to at least 55 lb-ft!
LS 3" OD Billet Overdrive Alternator Pulley 6 Rib 10-10042
Customer photo review of Powerglide Operator Series Billet Shifter Front Exit
Mike M.
Best shifter on the Market, solid piece. i made the mistake of buying a cheaper shifter first, DONT be me just spend the extra money the first time and have No regrets.
Powerglide Operator Series Billet Shifter Front Exit
Customer photo review of Motion Raceworks Billet Intercooler Water Pass Thru 12AN 16AN 20AN
Brandon W.
Great piece. Really wanted AN lines for my IC setup and wasn’t interested in passing them through the firewall. Nice and clean setup. Template made drilling the right spots a cake walk.
Motion Raceworks Billet Intercooler Water Pass Thru 12AN 16AN 20AN
Customer photo review of Motion Raceworks 79-93 Ford Fox Body Mustang Chromoly Lightweight Steering Column
Michael G.
Super excited about this looks great fits great easy to customize mounted my stock key switch and multi switch to the tube with some slight modifications to the steering wheel lock mechanism and the turn signal cancel switch. Thanks guys. Hope to see cleetus at drag week very soon. keep up the great work
Motion Raceworks 79-93 Ford Fox Body Mustang Chromoly Lightweight Steering Column
Customer photo review of Motion Raceworks Billet Aftermarket Turn Signal Switch 15-140
Sebastian H.
Very simple design. Glad to have a part of the racing community in my truck build. My favorite part is if the switch fails I can go to my local parts store and fix it. Awsome design looks good.
Motion Raceworks Billet Aftermarket Turn Signal Switch 15-140
Customer photo review of Rollbar Mount IGN1A Ignition Smart Coil Brackets 1.25" 1 1/4 Tube - PAIR
Charles W.
I made them work with the LS1/lS6 coil packs. Still doing some adjustments but over all happy knowing I was going to have to do some modifications to make them work.🤙
Rollbar Mount IGN1A Ignition Smart Coil Brackets 1.25" 1 1/4 Tube - PAIR
Customer photo review of Motion Raceworks 36" Throttle Cable w/ GM/Ford Pedal Attachment 18-140
Joe B.
Man with this drop and go made it so much easier to use than going a cheaper route. Sometimes it pays off when you spend the bigger buck. Love it….
Motion Raceworks 36" Throttle Cable w/ GM/Ford Pedal Attachment 18-140
Motion Raceworks ReviewsVisit store