Motion Raceworks ReviewsSee store reviews

I was amazed at not only the prompt shipping of this product but also the craftsmanship of the column. It was everything they advertised. I will definitely be purchasing more items through Motion.

Motion Raceworks coming thru with the parts racers need, once again. Well thought-out design, great fit and finish, and the price is right. Cheaper and less bulky than multiple Y-Blocks, hoses, and fittings to do the same job without being a restriction to the fuel system. Highly recommend!

The product was even more than I expected. Packaging was perfect and all the lines and fitting fit great. No odd bends or kinks at all in pre bent lines. Fit as it should with no issues at all!

I needed an in-line feed side sensor solution for a fairly large power 4cyl Ethonal turbo application and motion came through with a beautiful piece that not only works great but also mounts easily

Best darn deal I’ve got in a while. All the guys at motion are top notch providers of all types of race car stuff. Even Ford stuff! Plus I got a sucker in my my package Can’t go wrong when there is a motion box on the porch.

Top product ,top service, I have to modify it because its going onto my Buick v6 stage 11 tunnel ram twin turbo motor, will send photos late next week thanks Lindsay Hay New Zealand.

This thing has made my Camaro even more of an autocross monster. Removing the rag joint let me open up the full potential of my Borgeson quick ratio box. Only feedback I have is the lower U-Joint set bolt runs the engines cross member. I got a 5/16 flat hex head and used lock tite to keep it in place. Easy fix but figured I’d share.

Love the quick release build quality and how it looks with the MPI steering wheel and just how tough it feels the only thing I had to modify is for the part that bolts to the stock steering column is the threaded rod on the column was a little too long for the attachment so I had to cut a 1/8" off the column threaded rod to get it to fit tight but other then that no complaints at all I would recommend this to anyone!

Amazing figment a breeze to instal with that typical bad to the bone motion/tbm fitment ran 2 new lines to the factory prop valve and re drilled the petal arm at 2 inches landed dead between the 6-7:1 ratio as recommended by tbm and man does it feel amazing even with stock brakes feels just like the stock brake setup petal wise not Spongy and not hard as a rock highly recommend any motion/tbm products

Excellent wheel. Buttons feel and look great . Quality build and the aluminum matching is awesome. Really makes my interior look like a serious place to be . Overall great install and experience

Parts arrived on time and are of excellent quality . Customer service was also top notch . The motion Raceworks rep knew exactly what they were talking about and answered all of my questions right away

Awesome experience buying from Motion Raceworks!! The shipping was very fast, packaged up very nice and great communication! The steering wheel is even nicer in person, look forward to doing more business 🤟

A 4th Gen Camaro has a flat spot in the bottom of the tank just below the stock fuel pump bucket. That’s the perfect spot for this part. I used a 2 7/8” hole saw and after I cleaned up the shavings, the sump just snapped in perfectly. The tank is thick enough that the alignment fingers do not align the top plate that secures the sump. It was easy enough to hold it straight and tighten it. Saved me from buying a new tank. Thanks!

Showed up as expected, little bending of the mount to make it fit where I wanted and paired it with a -16 to 3/4 fitting to hook up at stock location. Now my system bleeds perfectly and I’ve achieved the 190 degree temperatures I’ve been chasing instead of 210. One thing I will note is finding a proper sized radiator cap in the pressure that I needed was a struggle but that could just be me.

These brackets are sick. No complaints. I was planning on fabricating something to make these coils work and happen to come across these and they look far better than anything I would have come up with.

Measure once, cut once, order multiple starters. It fits, it’s small and I’m sure it’ll crank well and my turbo drain slides right in finally. Maybe 2/3 the length of a stock starter with all the clockability to get it to fit.

I unfortunately had one of my expansion plugs pop out on my turbo 5.3... my holley monitors coolant pressure and it happened under 25 psi. Since installing this part I've had no more problems!

Its really helped me with my self confidence. I used to feel less than my friends but now that I'm an Elite Member I like to look down on all of them now. By all of them I mean my 1 friend. By 1 friend I mean my Uncle Jerry.

Don’t mind the mess that is my car but best quick release I’ve used! Like it a lot more than any of the ones that have splines. So much easier to get lined up.

I hesitated to spend this much on a steering column. I'm a budget operation. But I liked Doug's install video ( he made some good points) and I am also a big El Toro fan! When I opened the box I knew I made a good choice. This is a super nice unit! Dont cut corners here. This is a complete package. Its powder coated and ready to install. I was lucky I already had double d shaft and u joints on my old set up. They sell a nice package if you dont allready have them.

Sooo easy and clean to install when you making any upgraded power your making pressure these -12 ORB let the world flow and breath like a monster Craig Hunter : Pro Stunt Driver #huntergostunts#lamsports

Very easy to install! Hit it with an impact, old pulley comes off new one slides on! Don’t forget to measure backspacing of stock pulley before you remove. Super quality part!!

Great product. I have two of these now. One for radiator overflow and one for the transmission overflow. Great quality. Don't mind the wiring mess, I only have a picture from during wiring. This catch can is just to the left of the alternator. I have a different Motion catch can on the firewall as well.

I used this kit to install dzus fasteners on a 74 Nova. Being these rails were not designed for my car there was some minor modifications needed but it was far simpler than trying to install individual brackets. Powder coating on the rails was superb and the fasteners anodizing was perfect.

Beautiful product!!! It weighed in 10.4 lbs lighter than the stock column and the craftsmanship is second to none!!! I will be buying one for my other Fox body race car!

Quality of the part is excellent super easy to install! Only negative is the shipping cost, I check Motion first for parts butt end up back at Summit or Jegs based on shipping fees.

Easy to find part, very fast shipping. The installation was a breeze. And the best part was how easy it was to set up in the Holley software. Highly recommend!!!

Good quality just would like double o ring boss added to the adapter for a lil added security of leakage in case one fails but time will tell but so far it’s my 3rd one and they have been good

Very nice to have when wiring in a new ECU. I wired my Link G4x Xtreme direct to oem harnesses in my Lotus, but for the aftermarket bits, this is amazing. I just wish there were a DTM 8-pin version for 6 sensors.

Excellent catch can. Honestly the best one on the market. Have had many other brands and none have compared to this unit. The clockable feature really helps with routing the hoses for custom setup. The fittings are leak free and easy to assemble. Easy drain petcock valve on bottom makes draining a breeze. Very nice black finish on everything. Matches my setup perfectly. Highly recommended!

Looks great, and made very well. The wheel is very light too. I havent put it on yet, but it feels like it will fit my hands very well!! I have never spent that much money on a wheel before, but now I will never have a problem spending good money for a mpi steering wheel!!

I purchased this pulley to slow the alternator down. On a pass the voltage would drop after 5200 rpm . After I stalling the pulley the voltage maintains as it should. Nicey made product !

Well-made and quick shipping. Because of how nice a part it is. I was able to attach to a different brand shifter. Only wish it came in different finishes

Chose this over other brands due to the quality of baffling inside. Had another name brand can on my RZR Turbo and wouldn't catch any oil just pushed it out the breather after 30min of riding. This can works great. Baffling allows the oil to separate from the air and collect in the bottom. No issues even after a day of riding.

Great quality chute handle, mount, and cable. I decided to weld a bracket off my shifter mount and bolt the motion chute mount to that... Looks and fits great for a street/strip car.. easy to reach... doesn’t get in the way of the shifter (chute lever sits lower.. can’t tell in pics)... the reason I didn’t mount it on the passenger side is because I have my c02 bottles and passenger seat in the way. I highly recommend buying this set up because you can literally mount it anywhere.

The pulley will be going on my new turbo build. With the increased rpm of 8700. This will pro long the life of the alternator. Thank you Motion Race works, for your help and money saving tips with this product.

Even the blemished catch can is a work of art. The feeling you get as a customer when opening quality packaging to find an even better part is something else. Installation was easy and the can is doing a great job catching the oil during my engine break in process.

Worked perfectly and looks amazing. In the process of a procharger install and I’m sure they will work great with a top loader catchcan. Couldn’t be happier with the quality. Happy customer. Daniel M.

Feel excited again. The quality & craftsmanship will have you feeling excited to get your build going again & feel good about investing in components that will last while looking clean. Jump off the “sloppy build” bandwagon. Build fast, reliable & worthy things that you’ll have pride in putting your name on.