Alex A.
The steering column is amazing. U-joints worked perfect. You need this one and a DD shaft if you are using the factory steering rack. Customer service is great. Highly recommend!!!
Motion Raceworks ReviewsSee store reviews
Steering U-Joint 17MM DD to 3/4 DD 15-50005
Josh P.
Excellent quality as always. Super easy to install, zip the nut off with an impact and the pulley comes right off. Did a Katech belt tensioner at the same time and just went to Napa to get a new belt.
LS 3" OD Billet Overdrive Alternator Pulley 6 Rib 10-10042
Jasen A.
These breathers made it possible for adding a 10an connection on each valve cover. I was able to fit them on the bottom portion of the hideaway style covers that worked out great! Still finishing the build and plan to post more photos for Motion Raceworks crew!
Motion Raceworks Billet Valve Cover Breathers Clear Anodized (Pair) 32-120
Greg B.
This is a very well made fuel sensor mount that looks great! This will make it easy for me to switch between pump gas and E85 on Drag and Drive events. My car is a 1999 Z28 with a 441 cubic inch LS engine built by Siebert Performance in Topeka KS.
I'm using an Aeromotive dual 340 LPH fuel pump assembly inside the original gas tank. The pumps are wired separately through relay switches so that I can turn on one or both pumps; one for highway driving, and two when racing. The pumps have -...
Billet Dual Channel In Line Flex Fuel Sensor Mount For Feed or Return (6AN, 8AN, 10AN) Sensor Not Included
Brooks F.
Fast shipping, not sure if I won the mist and or not yet though lol. Ordered a large and am between a medium and large usually, this fits the shoulders perfect.
Motion Drive In Retro Shirt
Kyle L.
I cannot wait to drive my car with this new shifter. The gate can be awkward at first but even just playing with it in the car it feels awesome. Super well built as expected
TH400 3 Speed Reverse Pattern Operator Series Billet Shifter Front Exit 16-1700
Roy S.
I did it a little differently than it's designed to be used. I made a Plat that will bolt to a gm column and welded the "puzzle piece" onto the plate. All the parts are extremely high quality! Welded good.
Motion Raceworks SFI Quick Release Steering Hub 5/6 Bolt Pattern 15-240
John S.
Every piece is labeled for easy installation. comes with everything you need besides the actual tools to install. In my opinion it’s a little bit overpriced but looks cool and takes about an hour to install.
Motion Raceworks LS Stainless Coolant Crossover Steel Steam Vent Kit 10-10005
Greg P.
So glad motion came out with this quick release. Matches up with my three hole grant adapter that I ordered and will let me keep the factory column. Part looks great and is machined very well! Can’t wait to install!! Dalton I believe is who took my order and was able to answer my questions about the part.
Motion GM/Ford Bolt-On SFI Quick Release Hub 5/6 Bolt Pattern 15-270
George V.
Great design… twist on cap makes it so much easier and faster to fill fuel cell…no more leaks for me... Great quality …Straight forward install…( little aggravating to install if you have big hands but well worth it )
Motion Billet Fuel Cap (Screw on) 12 bolt w/ Seal and Hardware 27-150
Gregory B.
Fun Fact!!! The Gen 3 Hemi Hellcat engine has different head casting intake mounts than the truck variant. And nobody sells a lift plate for the truck version.
Your Gen 3 Hemi lift plate was such good quality that I was able to modify it to adapt to the truck intake mount holes off the heads, with only minor modifications.
Even though it was used in another application than intended...
It was a great buy and will be used over and over again.
Thank you for putting out good quality parts.
Gre...
Motion Raceworks Mopar Gen 3 Hemi Hellcat Engine Lift Plate 26-180
Thomas G.
The tire balancer spins so fast after adding the Motion Raceworks sticker, that I had to add a TBM brakes sticker to keep it from slinging all the weights off of a wheel..
TBM Sticker 2"x4"
Kevin R.
Hands down best customer service ever experienced. Sent an email with a few questions and received a call with 15 minutes with a tech who walked through the entire process. Installed the catch can in a c5 corvette. Anyone who has attempted this knows the confined area you are working with. Looks good in the car and is made with high quality parts. Was able to get the can installed on the passenger side head using a 180 fitting and the parts that come with the universal Ls kit.
Motion Raceworks Catch Can Kit for MRW Billet Valve Covers
Tyler R.
This sign is awesome. Super bright or you can turn it down to a more bearable brightness in a small room. Very nice remote control with flash and pulse functions.
Motion Raceworks LED Neon Shop Sign 40"x16"
Charles D.
I like it ,I have it in my kitchen on the wall. It was just as advertised in good condition, and I will enjoy it for a very long time.
Thanks Motion Raceworks.
Charles Dyke.
Motion Raceworks 12" Stamped Metal Sign
Clyde C.
Recently added a Rife gear position kit to the TH400 in my Nova. Installation was easy enough, and programming the Holley Pro Dash is a breeze. Sometimes it's the little things that make me happy.
Operator Shift Position Sensor Kit 16-146 (52-1702 Included)
Cory M.
Customer service is top notch. Catch can kit is by far the best one I’ve seen on the market. Works great for what I needed it to do on my vehicle.
Motion Raceworks Catch Can Kit for MRW Billet Valve Covers
Bradley S.
Nice setup. Lots of clearance to tuck lines etc. underneath. Nice quality except the China stamping printed on the 9o° fittings. Fitment was good however. Looks awesome installed. I have several motions parts and they fit great.
Motion Raceworks LS Stainless Coolant Crossover Steel Steam Vent Kit 10-10005
Bashar S.
These are just candy to me. Quality, finish, and design are just perfect. Even the baffles are held in with snap rings so you could service and clean when needed. Everything you need is in the box to get you going. I'm even contemplating relocating my coil packs just to show these puppies off. The logo size and placement has taste and not all over the covers and is a plus to me (I like discreet placement small in corners makes it more professional finishing touch).
Motion Raceworks Billet LS Valve Covers
Mike F.
Just what I needed to go from a 3 inch 90° bend into the motion merge into a 50mm wastegate. The merge and adapter fitting welded so nicely, I’m new to tig welding. Was worth the 30$ extra to make it all work together.
Wastegate Merge Adaptor Flange 21-13005
Peter Y.
I found Motion Raceworks 4th Gen F-Body chute kit to be the best design, fit and finish quality ( Powder coated to perfection). I had to make my chute removable to stow it in the hatch to fit in my garage ( used a 1/2” quick release pin). Works and looks great
Console Mount Billet Parachute Release Cable Kit 14-02008
Sean M.
I messaged Dalton about my charging issue. I had another “KRC 3.5” from Amazon. It wasn’t charging at idle. He explained that 3.5 is too big for stock size crank pulley.
He recommended the 3” pulley.
Boom my car charges at idle!
Took 5 minutes to change out.
Awesome part and awesome guy!!!
LS 3" OD Billet Overdrive Alternator Pulley 6 Rib 10-10042
Jason B.
Motion made this the easiest chute install possible. The parts fit great, and the video tutorial for installation was a great bonus. The finish of the bracket and quality hardware was nice to see.
1979-93 Mustang Fox Body Parachute Mount 14-100
William F.
Motion Raceworks shipped fast and communicated shipping status perfectly. Product is high quality, fairly priced and worked as expected. Overall very happy with the experience and will order from MR again!
Motion Raceworks Ford Coyote 5.0 Engine Lift Plate
Erich H.
Awesome fitment, went right on. Fast shipping with a surprise in the box. You guys are the best. Can't wait to afford a cleetus wheel and quick release for it too. Thank you again.
LS 3" OD Billet Overdrive Alternator Pulley 6 Rib 10-10042
Karl B.
The Diaper fit great to the engine was able to bolt the straps to the back of their heads and front of the heads not using the header bolts easy to install
Motion Raceworks SBF Engine Diaper for Dual Sump for Moroso 20534 / 20520 and similar Oil Pan
Mark P.
Hi, I purchased the black billet breather’s 12AN x 12ORB fittings also, because they have been tested by motion race works in there own drag and drive cars and passed their standards. I’m building a drag and drive car to participate in some of these events, 66 mustang with an Lsx 442 ci single 91mm turbo, Holley HP EFI, gear vendor’s overdrive, TH400 reverse manual valve body, strange 9” rearend with 3.23 gear for now, small tire car . Hyper fuel dual fuel pumps, Holley 120lb injectors, brodix ...
Motion Raceworks Billet Valve Cover Breathers Black Anodized (Pair) 32-120BLK
Bailey E.
THE LAST THROTTLE BODY I’ll buy for sure! Fitment was spot on, my uni bracket is perfect, throttlw cable worked perfectly after i altered my stock corvette pedal! Love motion raceworks, got alot of yalls parts on my ride!
Motion Throttle Cable Bracket for ICON 92/102mm for Motion Raceworks / Lokar Cable 18-11009-1
Ruben B.
Love the quality, looks and feel of the steering column. I had to buy additional pieces to make it work but all came on time from MR. Bought several pieces from them and all is great quality, form, fit and function.
1982-2002 Camaro/Firebird F-Body Chromoly Lightweight Steering Column Race Only 15-110
Cory B.
I'm very impressed with this company. This was my first purchase, which was done the Monday of their "Black Friday" sale. This throttle body was delivered Thursday, so Motion definitely didn't waste any time shipping it out.
They communicated with shipping updates through email and text, so sneaking this in the house without my wife knowing was super simple.
As for the quality, it seems to be very well made and engineered. I'll definitely be buying from them again soon
Motion Raceworks ICON 92mm /95mm Interchangeable Throttle Body 10-130
Darryl J.
I ran out of ports to install my Holley map sensor, checked with Motion for a solution cause they always have those one off parts to get you out of a bind, they had just what i needed, this adapter worked perfect, Thanks.
LS3 Intake Vacuum/Boost Reference Port Adapter to 1/8" NPT (LS3 Map Sensor)
Jason M.
Stoked to get to work on my motion race works diy steering kit! After getting the entire engine and trans ripped out of my car the other night and my shop robbed I was beyond happy to see they didn’t touch my motion kit!
Motion Raceworks DIY Lightweight Chromoly Steering Column Kit 15-210
James R.
These cherry sensors work great. Motion Race Works was fantastic to do business with and lightening fast shipping. The sticker and sucker were a great surprise as well! Would definitely do business here again!
Hall Effect Gear Tooth Sensor (1/2") 18-10006
Shannon D.
Tired of looking lame? We’ll look no further! Get ya one of these hoodies and all your friends with be blowing up your phone because you’re so cool with this Motion Raceworks hoodie. Will you be as cool as me holding a football, posing in front of my Cobra? Only one way to find out.
Motion Raceworks Longitude Hoodie
Joe S.
They dzus rails for the s10 were perfect. You can throw the hood on blindfolded and every 1/4 turn goes in perfectly. Watch the video on YouTube they put out and do what they show you. Take you time and you will not be disappointed!
Motion Raceworks 1994-04 S10 S10/Sonoma/Blazer Dzus Hood Rails (34") (Black Anodized)
Javier C.
This worked perfect for my 1000hp cts v, i just upgraded fuel system and got rid of my factory fuel lines and this billet flex fuel mount made it easy to ingratiate my flex fuel sensor into my lines with out having to down size line or restrict flow. Thanks for all the awesome products!
Billet Dual Channel In Line Flex Fuel Sensor Mount 6, 8, 10AN Sensor Not Included
Jonathan M.
So first time to the track and it blow the freezer plug out of the head. Found this product and it worked great. I was only able to use 3 of them because there is no room do to alt/ps bracket mounts to the head.
Motion Raceworks LS1 BIllet Frost Freeze Plug Brackets (Set of 4)
Randy S.
Don’t hesitate thinking about this catch can from these guys . From from the fit and finish to even the amazing packaging system it is lovely and functions like one should. This is not installed in a muscle car but my family member Felix. (1976 BMW 2002 classic ) We are both very happy now. Thank you for the new bag of tricks Motion Raceworks!
Motion Raceworks Top Loader Billet Oil Catch Can ( Dual 10 AN Port ) 32-100
Keith T.
Motion race works killed it again with another awesome part. This replaced the factory plastic vacuum tree on my foxbody. I think it cleaned up all my lines a lot. Thanks again guys. You rock🤙🏻🤙🏻
Motion Raceworks Vacuum Boost Reference Billet Aluminum Distribution Block 18-10020
Manuel C.
Motion raceworks completely changed the look under my hood with there beautifully crafted products and it was all very easy to install and custom fit! Thanks guys I love it!
Motion Raceworks Billet Valve Cover Breathers Polished (Pair) 32-120
Motion Raceworks ReviewsVisit store