Dirty Diesel Customs Reviews

Dirty Diesel Customs ReviewsSee store reviews

Customer photo review of 50 Cal. Bullet Antenna (DDC-EXT-A011)
Zoey R.
Purchased this for my fiancé and have been so impressed since the beginning. The part was delivered within 2 days of ordering, was easy to install and works/looks great. Definitely recommend this product and company.
50 Cal. Bullet Antenna (DDC-EXT-A011)
Customer photo review of 2003-2007 Powerstroke Hot Side Charge Pipe (SDG-INTRPIPE-6.0-HOT)
Steven P.
Fit well. I had to use one old clamp. As one of the new clamps was too large and would not tighten up enough without maxing out on the threaded section. The new pipe has an exterior bevel that secures the hoses on better. So far the intercooler pipe has not blown off like the factory pipe kept doing.
2003-2007 Powerstroke Hot Side Charge Pipe (SDG-INTRPIPE-6.0-HOT)
Customer photo review of 2007.5-2012 Cummins Gen 2 Monster-Ram Air Intake System (42797)
John W.
Purchasing was a breeze, the website was easy to navigate and the reviews made the purchase a no brainer. Installation was tedious but very straightforward and not confusing. Will definitely be a repeat customer in the future. Thank you DDC
2007.5-2012 Cummins Gen 2 Monster-Ram Air Intake System (42797)
Customer's Manual Valve Body Switched Shifter installed in the cab of a vintage 1944 Dodge truck.
Austin B.
Installed into a 1944 dodge Twin turbos case 5.9l Backed up to a 47re 4 disk torque converter with a fmvb No need for a Pcm or ECM love it
1994-2007 Cummins 47/48RE Manual Valve Body Switched Shifter (47/48RE-Shifter-FS)
Customer photo review of Universal FASS High Output Heater Kit (HK1002)
Brit S.
The pre-assembled wiring harness is kind of a pain but it works with a little planning. I’ll have to trim and splice the extra some day but it works well and installs nice and clean.
Universal FASS High Output Heater Kit (HK1002)
Customer's bright red Monster-Ram Intake installed in the engine bay of a Cummins diesel truck.
Kelly S.
Took awhile to get it but it was worth the wait and they threw in some swag for the wait. Really good to deal with and the monster ram will bring your Cummins alive.
2019-2024 Cummins Monster-Ram Intake & Grid Heater Upgrade (42799)
Customer photo review of 2007-2009 Cummins Boost Tube Upgrade Kit (25990)
Terry L.
Great looking upgrades to my 6.7 Cummins. The Monster Ram intake and boost tubes have made truck so much nicer to tow my 5th wheel. Seen about 10% better fuel economy. Throttle response great with acceleration that puts you back in your seat. Great for fast passing of semi trucks.
2007-2009 Cummins Boost Tube Upgrade Kit (25990)
Customer's new Bosch CR Fuel Rail installed in a Cummins engine bay, showing connections and surrounding parts.
Brent N.
This is a 100% Bosch part. Came with a new high pressure sending unit and pressure relief valve already installed. Copper crush washers were not included for the pressure relief. This just made sense as it wasn’t too much more in cost than the sensor and relief valve by themselves. If your fuel system is contaminated this is a must
2003-2007 Cummins Bosch CR Fuel Rail (0445226014)
Customer video review of 2011-2019 Powerstroke AMDP Tuned EZ-Lynk Auto Agent 3.0
Kailin K.
Love the new tunes! My truck suffered from some serious bottom end lag. AMDPs tunes sure solved that! Before it wouldn’t light up the stock turbo till 1500rpm, now it spools the stock turbo much, much faster and will actually spin tires off the line. The initial cost of tunes plus the tuner is a hard one to swallow but worth every penny.
2011-2019 Powerstroke AMDP Tuned EZ-Lynk Auto Agent 3.0
Customer photo review of 2007.5-2012 Cummins 63mm FMW Holset VGT Cheetah Turbocharger (FPE-351-0712)
Kaleb D.
Came faster than expected (1 week) and installed the same day of the delivery. So far so good with the new turbo installed. If you’re looking for a drop in stock placement VGT turbo with tons of power and made high quality, this is the turbo for you! KDFLYN on tiktok for video proof
2007.5-2012 Cummins 63mm FMW Holset VGT Cheetah Turbocharger (FPE-351-0712)
Customer photo review of 2003-2004 Cummins 5" Turbo Back Exhaust - No Muffler (FLO-605NM)
James D.
This makes my truck sound rowdy! Easy to put on , comes with an extra bit of pipe just incase. Shipped in two business days and they emailed me making sure everything was good ! Very happy with this service and will definitely be keep adding some dirty parts.
2003-2004 Cummins 5" Turbo Back Exhaust - No Muffler (FLO-605NM)
Customer photo review of 2004.5-2005 Duramax Driver Side Freedom Series Cylinder Head (FPE-61-10002-D)+3
Edward C.
Getting these heads is the way to go . You don’t have to wait for machine shop to check them over and sometimes that can be a week or so and if one doesn’t make it you just end up either buying a new one or rebuilding them and if that’s the case you really don’t save any money not going this way
2004.5-2005 Duramax Driver Side Freedom Series Cylinder Head (FPE-61-10002-D)
Customer photo review of 2020-2022 Powerstroke 4" CAT & DPF Race Pipe (FLO-20342)
Hector J.
Everything fits perfect! Installation was easy. I only have to bought the 3 bolts of the back side, because the ones that came out of the dpf where from a smaller diameter.
2020-2022 Powerstroke 4" CAT & DPF Race Pipe (FLO-20342)
Customer photo review of 2009-2024 Cummins Dirty EGR/Cooler Delete (I67-EGR-A006)
Josh V.
This kit is great quality, easy to install especially with the step by step guide. This is the fourth or fifth kit/item that I have purchased from Dirty! They never disappoint! I recommend them to anyone looking for parts for their trucks!
2009-2024 Cummins Dirty EGR/Cooler Delete (I67-EGR-A006)
Customer photo review of 2004.5-2010 Duramax PowerFlo In-Tank Lift Pump (FPE-34789)
Dennis N.
The lift pump assembly is working great. Fit perfect and no issue. Took 5 hrs but I could do it in half that now. Prior to install I was having fuel rail pressure issues that caused the transmission to hold out shifting during hard acceleration (assuming due to low torque) plus the “change fuel filter” light would come on due to low rail pressure during hard accelerating. Everything connected to factory connections, the only thing needed is connections to power and ground at the fuse box.
2004.5-2010 Duramax PowerFlo In-Tank Lift Pump (FPE-34789)
Customer photo review of 2003-2024 Cummins Steering Box Stabilizer (1032003)
Jean M.
Easy to install , works great with my new Bilstein damper , will definitely save my steering gear box in the long run , immediate change in steering , in all , money wisely spent for TLC of your vehicle
2003-2024 Cummins Steering Box Stabilizer (1032003)
Customer photo review of 2008-2010 Powerstroke Black Diamond Head Gaskets (SD-BD-6.4)
Dave M.
Another distributor that I will not name waited almost 2 weeks to inform me that the head gaskets were back ordered for another 3 weeks, canceled the order ( still waiting for a refund 2 weeks later) called these guys and had them the following day. I explained my situation, needed my truck out of the shop, had a lot of big jobs coming in the following week and they got it to me , was able to stick with my original plan and knock everything out that weekend. Didnt skip a beat, therefore my cust...
2008-2010 Powerstroke Black Diamond Head Gaskets (SD-BD-6.4)
Customer photo review of 2011-2016 Duramax Resonator Delete (75320)
Jamie
Perfect fit and easy to install. Arrived quickly. No option to pick colour, red was what was showed. I received black which I perfered and am very happy with. It definitely let's me hear the turbo. It might be bearing noise thats heightened by the lack of resonator. But it sounds good, im sure there's a fraction of a percent of better flow aswell. Would definitely recommend
2011-2016 Duramax Resonator Delete (75320)
Customer photo review of Universal Banks iDash Pro (66710)
Daryle D.
iDash is everything it promises to be. There are over 200 items that I can monitor. The only negative thing I can say about it is that documentation is lacking however there are many YouTube videos that can help configure it. Great addition to my new truck.
Universal Banks iDash Pro (66710)
Customer photo review of 4" to 5" "AR-15" Exhaust Tip (SD-EXHST-AR-4-5)
Steve R.
Truck is dirty but the exhaust tip fit very well. I cut about 7" of the OEM exhaust to make it fit the way I like it. I did not want to have the tip sticking out too far. 2020 RAM 3500 HD.
4" to 5" "AR-15" Exhaust Tip (SD-EXHST-AR-4-5)
Customer photo review of 2019+ Cummins 5" Flexpipe Back Exhaust System No Muffler SS (512015)
Jared
Install was straight forward on my 2019. I have the factory air ride system and it does fit with some patience and minor adjustments. The spare tire heat shield had to be removed and the one rear bracket shortened. Truck sounds good and has next to no exhaust drone when fully loaded or empty.
2019+ Cummins 5" Flexpipe Back Exhaust System No Muffler SS (512015)
Customer photo review of 2011-2016 Powerstroke Intercooler Pipe Fix (IPF67F)
Jeremy C.
Good replacement for the plastic cold-side pipe. The metal is well machined and fits perfectly, took 15 minutes to throw on the truck. Used a little lithium grease to help the silicone pipe onto the metal pieces. Looks a little different than the pictures and didn't come with instructions but was easy to figure out.
2011-2016 Powerstroke Intercooler Pipe Fix (IPF67F)
Customer photo review of EZ-Lynk Auto Agent 3.0 - Cloud Based Tuning & Diagnostics (No-Tune)
Clinton O.
Love the new Ez Lynk, easy to use. Can leave it plugged in all the time and it's out of the way. Great for data logs or just monitoring data.
EZ-Lynk Auto Agent 3.0 - Cloud Based Tuning & Diagnostics (No-Tune)
Customer photo review of 2011-2016 Powerstroke XB LED Black Headlights (LF505-ASM)
Dave E.
High quality product. Install was a snap even doing it outside in the winter. Highly recommend the 12” flat head to make things a breeze. These lights are way brighter than the stock headlights. Great product, great plug and play install
2011-2016 Powerstroke XB LED Black Headlights (LF505-ASM)
Customer photo review of 2010-2021 Cummins - EFI Live Autocal + CCS Tunes+2
Juventino R.
"I recently purchased the EFI Live V3 with ccs tunning for my SMEDING DIESEL billet 63sxe turbo swap from Dirty Diesel for my 2016 Ram 3500, and I couldn't be happier with the results! The tuning capabilities of this device are top-notch, allowing me to optimize my truck's performance to suit my specific needs. The installation process was straightforward, and the user interface is intuitive, making it easy to navigate and make adjustments. The increased power and improved fuel efficiency I've e...
2010-2021 Cummins - EFI Live Autocal + CCS Tunes
Customer photo review of 2014-2019 Ram ECODIESEL CAT Fuel Filter Adapter (030-FUE-A063)
David S.
Nice, neat fitment. Quick install. The OEM filters were always swelling up even changing them every oil change. Glad to have another great solution from Dirty Diesel. Thanks a bunch
2014-2019 Ram ECODIESEL CAT Fuel Filter Adapter (030-FUE-A063)
Customer photo review of 2011-2024 Powerstroke Gen2.1 CP4 Bypass Kit w/ Return Filter Assembly (CP4-6.7F-BP-G2.1)+2
Scott D.
Install of S&S disaster prevention kit. Big job but took my time and fit good. It is worth the time and money for this kit for piece of mind with the troublesome CP4 pump. Thanks to Dirty for the reasonable pricing and fast shipping to Vancouver Island.
2011-2024 Powerstroke Gen2.1 CP4 Bypass Kit w/ Return Filter Assembly (CP4-6.7F-BP-G2.1)
Customer video review of Shipping Insurance
Brandon C.
First time purchasing banks systems. I’m a 15yr in technician and I must say I’m very impressed with the build quality and thought that went into this kit. as long as you have the tools a complete beginner would be able to assemble this, if you follow the 134 picture instructions. Throttle response difference is noticeable in town. no tuning required. and the added bonus of eliminating the engine killing oem grid heater is definitely a win! would recommend
Shipping Insurance
Customer photo review of 2014-2024 Cummins Upper & Lower Ball Joint Package (1420BJPACK)
Trevor C.
Installed these kriptonite upper and power balljoints in my 2017 ram 3500 dually today. Everything went in perfect. Dirty diesel was very good from great service to fast shipping. Will buy from them again.
2014-2024 Cummins Upper & Lower Ball Joint Package (1420BJPACK)
Customer photo review of 2020-2024 3.0L Duramax S&B Cold Air Intake Kit (75-5137-1)
Matt N.
Install was pretty easy just time consuming and hard to get the intake pipe back on the turbo and have it all click onto the grommets but overall was worth it just to make the engine bay cleaner.
2020-2024 3.0L Duramax S&B Cold Air Intake Kit (75-5137-1)
Customer photo review of Dirty Exhaust Tip (Trigger-Exhaust-Tip)+1
Ryan K.
After a quick fit and shorten of existing pipe. It popped on and immediately put a smile on my face before it was even tightened! Looks stellar and produced more turbo whistle when up against barricades/rock walls. 10/10 recommend.
Dirty Exhaust Tip (Trigger-Exhaust-Tip)
Customer photo review of 2013-2018 Cummins RAM-Air Cold Air Intake Kit (42255-D)
Anthony V.
Awesome product definitely worth the buy, the only thing I will mention is the 4 inch rubber connector from the intake to the turbo inlet is just a little to short it still clamps on tho, other then that install was very straight forward and the instructions provided are clear. Dirty diesel is the only place I would recommend buying parts from there customer service is excellent and they have fast shipping
2013-2018 Cummins RAM-Air Cold Air Intake Kit (42255-D)
Customer photo review of 2003-2007 Duramax All Lights On Module (FPE-GM-ALO-37)
Lynden W.
Who needs an $100-200 amazon light bar that looks hideous when you can just plug this in and get the maximum light output. Installation couldn’t get much easier, remove 3 (2 if you don’t have fog lights) relays, place the board onto the base of the fuse panel and reinstall the relays. PS a pair of needle nose pliers makes it way easier. I highly recommend for these long and dark Canadian Winters.
2003-2007 Duramax All Lights On Module (FPE-GM-ALO-37)
Customer photo review of 2001-2006 Duramax LB7/LLY EGR Blocker Plate (71100)
Lynden W.
Super easy install with the right tools to get back there. Takes 10 mins. Nice to know I’m not having any soot filled hot air getting into my intake! Good cost effective solution to block egr without having to fork out couple hundred bucks for a down pipe/egr delete kit or if your province/state has emissions testing you can remove it once it comes time and throw it right back in after. Also, a bonus fact about the LLY is you can run it without finger sticks and it won’t put the engine in limp m...
2001-2006 Duramax LB7/LLY EGR Blocker Plate (71100)
Customer photo review of 2003-2007 Cummins MT In Line 4" PRXB Exhaust Brake Kit (C44068)
Dean H.
I installed the pakbrake went very well. Works great. I decided to install the air tank on the passenger side behind the second battery worked very well in this location. Installed a second switch to turn off the compressor. Instructions were simple to follow no issues with the install
2003-2007 Cummins MT In Line 4" PRXB Exhaust Brake Kit (C44068)
Customer photo review of 2003-2024 Cummins Steering Box Stabilizer (1032003)
Tyson H.
Put it on my one ton dually and fits like a charm clear instructions and about 20 minutes to install. Paired with the bd diesel steering box brace made a night and day difference on my truck
2003-2024 Cummins Steering Box Stabilizer (1032003)
Customer photo review of 2014-2022 Ram EcoDiesel CCS Bench Flash Custom Tuning
Lee H.
Spencer gave me my options and answered all my concerns. When I installed the unit Ole Floyd fired right up and purred perfect. Spencer. Thanks for the help and tune. You guys rock.
2014-2022 Ram EcoDiesel CCS Bench Flash Custom Tuning
Customer photo review of 2013-2018 Cummins Billet Dual Radiator Coolant Y-Pipe (I67-ENG-A001)+1
Dustin Z.
Changing out the old peice for this want to bad, it’s easier to pull the small line off and unhook the 2 bigger ones and change it outside the truck so when the brittle plastic one breaks you don’t have to fish the broken plastic out of the lines. Very solid peice, really nice for peace of mind that there won’t be having to change out broken plastic ones anymore!
2013-2018 Cummins Billet Dual Radiator Coolant Y-Pipe (I67-ENG-A001)
Customer photo review of 2016-2019 2.8L Duramax EFI Live Autocal + CCS Tunes
Wyatt I.
The experience was great. Had a few small issues to work out which wasn't a big deal. The power is great I got the 90hp tune and transmission tuning. When your on hold the skit is worth is funny and is alot better then the crappy music most places have.
2016-2019 2.8L Duramax EFI Live Autocal + CCS Tunes
Customer photo review of 2003-2007 Cummins - Stock Exchange CP3 Injection Pump (1050105)
Timm H.
Couldnt have asked for a better time changing out the cp3 after having done it once already. Out with the old in with the new in about 4 hours total and my truck is running much smoother and responsive. Thanks again!
2003-2007 Cummins - Stock Exchange CP3 Injection Pump (1050105)
Dirty Diesel Customs ReviewsVisit store